Cisco CP-7962G Administration Guide - Page 97

Chapter 4 Configuring Settings on the Cisco Unified IP Phone Device Configuration Menu UI Configuration Menu The UI Configuration menu displays the status of various user interface features on the phone. Table 4-14 describes the fields in this menu. Table 4-14 UI Configuration Menu Options Option Description To Change Auto Line Select Indicates whether the phone shifts the call focus to incoming calls on all lines. When this option is disabled, the phone only shifts the call focus to incoming calls on the line that is in use. When this option is enabled, the phone shifts the call focus to the line with the most recent incoming call. From Cisco Unified Communications Manager Administration, choose Device > Phone > Phone Configuration. Default: Disabled BLF for Call Lists Indicates whether the Busy Lamp Field (BLF) is From Cisco Unified Communications Manager enabled for call lists. Administration, choose System > Enterprise Parameters. Reverting Focus Priority Indicates whether the phone shifts the call focus on the phone screen to an incoming call or a reverting hold call. Settings include: Lower-Focus priority given to incoming calls. From Cisco Unified Communications Manager Administration, choose System > Device Pool. See also: Hold Reversion. Higher-Focus priority given to reverting calls. Even-Focus priority given to the first call. Auto Call Select Indicates whether the phone automatically shifts From Cisco Unified Communications Manager the call focus to an incoming call on the same line Administration, choose Device > Phone > when the user is already on a call. Phone Configuration. When this option is enabled, the phone shifts the call focus to the most recent incoming call. When this option is disabled, all automatic focus changes, including Auto Line Select, are disabled regardless of their setting. Default: Enabled "more" Softkey Timer Indicates the number of seconds that additional softkeys are displayed after the user presses more. If this timer expires before the user presses another softkey, the display reverts to the initial softkeys. From Cisco Unified Communications Manager Administration, choose Device > Phone > Phone Configuration. Range: 5 to 30; 0 represents an infinite timer. Default: 5 OL-21011-01 Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP) 4-25