Cisco SF100D-05 Quick Start Guide - Page 5
Step 1, Step 2 - switch
View all Cisco SF100D-05 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
NOTE If the uplink from one unmanaged, cascaded switch to another is moved from one port to another port, it can take 30 to 60 seconds for full network operation to resume. This is normal and expected behavior. To connect the unmanaged desktop switch to a network device, such as a printer or workstation: STEP 1 Connect the Ethernet cable (Cat5 or better recommended) to the Ethernet port of a computer, printer, network storage, or other network device. STEP 2 Connect the other end of the network Ethernet cable to one of the numbered unmanaged desktop switch Ethernet ports. The LED of the port lights if the device connected is active. STEP 3 Repeat Step 1 and Step 2 for each device you want to connect to the unmanaged desktop switch. STEP 4 Connect the power adapter to the switch and to a power source, and move the power switch to the on position. CAUTION Make sure you use the power adapter included with the switch. Using a different power adapter might damage the switch. Unmanaged Desktop Switch 4