Cisco SFS7000P-SK9 Command Reference - Page 260

show ib pm threshold Chapter 6 Show Commands show ib pm threshold To view performance monitoring thresholds, enter the show ib pm threshold command in User Execute mode or Privileged Execute mode. show ib pm threshold subnet-prefix prefix Syntax Description subnet-prefix prefix Specifies the subnet prefix of the thresholds to view. Subnet prefix of the thresholds to view. Defaults This command has no default settings. Command Modes User Execute mode, Privileged Execute mode. Usage Guidelines : Platform Availability: Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module for IBM BladeCenter Privilege Level: General read-only user. Command Output: subnet-prefix symbol-errors link-recovery-errors link-downs rcv-errors rcv-remote-phy-errors rcv-switch-relay-errors xmit-discards xmit-constraint-errors rcv-constraint-errors local-link-integrity-errors excessive-buf-overrun-errors vl15-droppeds xmit-rate rcv-rate Subnet to which the threshold configuration applies. Threshold for Symbol Error counters. Threshold for Link Recovery Error counters. Threshold for Link Downed counters. Threshold for Port Receive Error counters. Threshold for Port Receive Remote Physical Error counters. Threshold for Port Receive Switch Relay Error counters. Threshold for Port Transmit Discard Error counters. Threshold for Port Transmit Constraint Error counters. Threshold for Port Receive Constraint Error counters. Threshold for Local Link Integrity Error counters. Threshold for Excessive Buffer Overrun Error counters Threshold for VL15 Dropped Error counters Threshold for transmit rate, as a percentage of total port bandwidth Threshold for receive rate, as a percentage of total port bandwidth 6-94 Cisco SFS 7000 Series Product Family Command Reference Guide OL-9163-02