Cisco SPA8000-G1 Quick Installation Guide - Page 7

Service setting. Then enter the PC's MAC address in the Cloned MAC Address field. 3. Click Submit All Changes. Static IP 1. Select Static IP for the Connection Type. 2. In the Static IP Settings section, enter the IP address in the Static IP field, the subnet mask in the NetMask field, and the default gateway IP address in the Gateway field 3. In the Optional Settings section, enter the DNS server address(es) in the Primary DNS and optional Secondary DNS fields. 4. Click Submit All Changes. Static IP PPPoE (most DSL users) 1. Select PPPoE for the Connection Type. 2. Enter the user name in the PPPoE Login Name field, and enter the password in the PPPoE Login Password field. 3. Click Submit All Changes PPPoE If the Gateway is pre-configured by your ITSP, then you do not need to change any of the default voice settings. Refer to the documentation supplied by your service provider for more information. If you want to change the settings for your Internet phone service, refer to the User Guide, which is available on the Linksys website at www.linksys.com. If you want to configure network settings using the Interactive Voice Response Menu, refer to the next section.