Cisco SPA8000-G1 Quick Installation Guide - Page 9

Interactive Voice Response Menu Action Command Choices Description Enter Interactive Voice Response **** Menu Check Internet Connection Type 100 Set Internet 101 Connection Type Check IP Address 110 (Ethernet Port) DHCP - 0 . Use this command to enter the Interactive Voice Response Menu. Do not press any other keys until you hear, "Linksys configuration menu. Please enter the option followed by the # (pound) key or hang up to exit." Check static or dynamic IP . Select the type of Internet connection you are using. Refer to the documentation supplied by your Internet Service Provider (ISP) Hear the IP address assigned to the Gateway's Internet (external) interface. Set Static IP 111 Address Check Network 120 Mask (or Subnet Mask) Set Network (or 121 Subnet) Mask Check Gateway 130 IP Address First, set the Internet Connection Type to static IP address; otherwise, you will hear, "Invalid Option," if you try to set the static IP address. Use the * (star) key when entering a decimal point. Hear the network or subnet mask assigned to the Gateway. First, set the Internet Connection Type to static IP address; otherwise, you will hear, "Invalid Option," if you try to set the network or subnet mask. Use the * (star) key when entering a decimal point. Hear the IP address of the Gateway (usually the network router).