Cisco SPA901-NA Administration Guide - Page 156
Tab (SPA962 only), General
View all Cisco SPA901-NA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
Chapter 5 Linksys IP Phone Field Reference 932 Tab (SPA962 only) This tab includes the following sections: • General, page 5-51 • Unit 1, page 5-52 • Unit 2, page 5-53 General 932 Tab (SPA962 only) Field Subscribe Expires Subscribe Retry Interval Unit 1 Enable Subscribe Delay Test Mode Enable Unit 2 Enable Server Type Call Pickup Code Description Specifies how long the subscription remains valid. After the specified period of time, elapses, the SPA932 initiates a new subscription. Defaults to 1800. Specifies the length of time to wait to try again if subscription fails. Enables or disables the first SPA932 unit (each SPA962 can have up to two SPA932s attached). Length of delay before attempting to subscribe. Defaults to 1. Enables or disables test mode. When test mode is enabled, the LEDs are turned on when keys are pressed, going from off to green to red, and back to off. In test mode, when all the buttons on the sidecar are returned to off, all the keys become amber. The SPA962 must be rebooted after the test is completed. Enables or disables the second SPA932 unit (each SPA962 can have up to two SPA932s attached). Selects the type of server used. The star code used for picking up a ringing call. Defaults to *98. Firmware Version 5.1 Linksys IP Phone Administrator Guide 5-51