Cisco SRST User Guide - Page 33

Chapter 1 Cisco SRST SNMP MIB Support Configuration alias 1 1234 to 9988 huntstop alias 2 2222 to 5552222 alias 4 4444 to 5554444 alias 8 8888 to 5558888 time-format 24 date-format yy-mm-dd cor incoming eng default cor incoming eng 1 2000 cor incoming eng 2 2000 - 2010 cor outgoing hr 1 1000 cor outgoing hr 2 2000 ! ! line con 0 exec-timeout 0 0 line aux 0 line vty 0 4 login ! ! end Configuring SRST Mode Perform the following steps to configure SRST mode. Step 1 Step 2 Step 3 Step 4 Step 5 Have Ephones registered to CME or CallManager before enabling SRST. Have an Ephone-dn assigned to each Ephone. Have a button associated with each Ephone-dn. Configure and show call-manager-fallback. Verify the response to show call-manager-fallback is similar to the following: SRST-Router#sh call-manager-fallback CONFIG (Version=3.3 Version 3.3 For on-line documentation please see: www.cisco.com/univercd/cc/td/doc/product/access/ip_ph/ip_ks/index.htm ip source-address 1.4.196.1 port 2000 max-ephones 10 max-dn 10 max-conferences 8 gain -6 dspfarm units 0 dspfarm transcode sessions 0 huntstop dialplan-pattern 2 2222 extension-length 2 extension-pattern 20 no-reg dialplan-pattern 4 4444 extension-length 4 extension-pattern 4040 dialplan-pattern 5 5555 extension-length 2 extension-pattern 50 access-code bri 333 direct-inward-dial access-code pri 44 direct-inward-dial time-format 24 date-format yy-mm-dd timezone 0 Greenwich Standard Time transfer-pattern 111 blind transfer-pattern 202 transfer-pattern 301 blind cor incoming eng default cor incoming eng 1 2000 OL-7959-01 Cisco SRST SNMP MIB Release 3.4 Guide 1-19