Cisco SRST User Guide - Page 53

Chapter 1 Cisco SRST SNMP MIB Support CISCO-SRST-MIB Object Groups Table 1-6 SRST MIB Object Groups and Descriptions (continued) MIB Group MIB Object Max Access Description csrstLimitDNType read-only This object indicates the type of IP phone to which the limit-dn is applied to. ipPhone7910 (1), ipPhone7935 (2), ipPhone7940 (3), ipPhone7960 (4), ipPhone7970 (5), ipPhone7936 (6) csrstLimitDN read-only This object indicates the maximum number of directory numbers available to each type of IP phone. The current range of maximum lines setting is from 1 to 34. The default is 6. csrstNotificationEnabled read-write This variable indicates whether this system produces the SRST notifications. A false value will prevent SRST notifications from being generated by this system. csrstNotifInfoGroup csrstSysNotifSeverity accessible- The internally-defined severity of the particular alarm for-notify condition, associated with the most recent SNMP notification. A subsequent event in which the alarm condition changes from its failed state back to a 'normal' state has a severity of 'clear'. This severity-level value is supplied with each SRST specific notification. csrstSysNotifReason accessible- The internally-defined failure cause of the particular for-notify alarm condition, associated with the most recent system notification. csrstActiveStatsGroup csrstState read-only This object indicates the current state of Cisco SRST feature on this router. Active - At least one IP or SIP phone is registered Inactive - Cisco SRST has no IP or SIP phones registered This object has no significance if csrstEnabled object is disabled. csrstSipPhoneCurrentRegiste read-only Total number of SIP phones currently registered to the red SRST router. csrstSipCallLegs read-only Total number of SIP call legs routed through the SRST router since going active. This includes incoming and outgoing calls. OL-7959-01 Cisco SRST SNMP MIB Release 3.4 Guide 1-39