Cisco WAP200E-EU User Guide - Page 14
AP Mode, Administration, Status - firmware
UPC - 745883578627
View all Cisco WAP200E-EU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Chapter 5 AP Mode Use this screen to configure the Access Point operation mode with WDS (Wireless Distribution System). Administration You will use the Administration tabs to manage the Access Point. Management This screen allows you to customize the password and Simple Network Management Protocol (SNMP) settings. Log Configure the Log settings for the Access Point on this screen. Factory Default Use this screen to reset the Access Point to its factory default settings. Firmware Upgrade Upgrade the Access Point's firmware on this screen. Reboot Use this screen to reboot the Access Point. Config Management You can back up the configuration file for the Access Point, as well as save the backup configuration file to the Access Point. Status You will be able to view status information for your local network, wireless networks, and network performance. Local Network This screen displays system information, including software & hardware version, MAC address, and IP address on the LAN side of the Access Point. Wireless This screen displays wireless network settings including SSID, network mode, and wireless channel. System Performance This screen displays the current traffic statistics of the Access Point's Wireless and LAN ports. Quick Configuration Overview Wireless-G Exterior Access Point with Power Over Ethernet