Cisco WBP54G User Guide - Page 34
C-12: Upgrade
UPC - 745883566358
View all Cisco WBP54G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Wireless-G Bridge for Phone Adapters 15. The Upgrade Utility will upgrade the Bridge's firmware. A pop-up screen will appear when the upgrade is complete. Click the OK button. IMPORTANT: Do not disconnect the power adapter from the Bridge while the firmware is being upgraded. Otherwise, damage may occur to the Bridge. 16. Disconnect the Ethernet network cable from the PC. If the phone adapter or IP phone is in a different room, disconnect the power adapter from the electrical outlet. Move the power adapter and Bridge to the location of the phone adapter or IP phone. 17. Connect the Ethernet network cable of the Bridge to the phone adapter or IP phone. 18. Connect the power cable of the Bridge to the Power port of the phone adapter or IP phone. If necessary, plug the power adapter into an electrical outlet. Figure C-12: Upgrade Successful Appendix C: Upgrading Firmware 28