Cisco WS-C3560V2-24TS-E Command Reference - Page 820
debug platform resource-manager - sd
View all Cisco WS-C3560V2-24TS-E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 820 highlights
debug platform resource-manager Appendix B Catalyst 3560 Switch Debug Commands debug platform resource-manager Use the debug platform resource-manager privileged EXEC command to enable debugging of the resource manager software. Use the no form of this command to disable debugging. debug platform resource-manager {all | dm | erd | errors | madmed | sd | stats | vld} no debug platform resource-manager {all | dm | erd | errors | madmed | sd | stats | vld} Syntax Description all dm erd errors madmed sd stats vld Display all resource manager debug messages. Display destination-map debug messages. Display equal-cost-route descriptor-table debug messages. Display error debug messages. Display the MAC address descriptor table and multi-expansion descriptor table debug messages. Display the station descriptor table debug messages. Display statistics debug messages. Display the VLAN-list descriptor debug messages. Defaults Debugging is disabled. Command Modes Privileged EXEC Command History Release 12.1(19)EA1 Modification This command was introduced. Usage Guidelines The undebug platform resource-manager command is the same as the no debug platform resource-manager command. Related Commands Command show debugging Description Displays information about the types of debugging that are enabled. For syntax information, see the Cisco IOS Release 12.2 Configuration Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. B-60 Catalyst 3560 Switch Command Reference 78-16405-05