Cisco WS-C5500 Installation Guide - Page 18
Installing the Controller in a 2-Post Rack-Mid-Mount, Installing the Cable Guide
UPC - 746320120034
View all Cisco WS-C5500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Unpacking and Installing the Controller Figure 14 Installing the Cable Guide RP SP USB0 USB1 CONSOLE EN EN Cisco 5500 Series Wireless Controller 12 34 56 78 Model 5508 PS1 PS2 SYS ACT 205855 Installing the Controller in a 2-Post Rack-Mid-Mount Caution The controller weighs 20 lbs (9.1 kg) with both power supplies installed. Two or more people must work together to install the controller. Warning This unit might have more than one power supply connection. All connections must be removed to de-energize the unit. Statement 1028 Note When you use the mid-mount option, you cannot ground the chassis using the chassis grounding pad or the provided grounding lug. You will need to ground the chassis in a different location on the chassis (such as the rear bracket mount holes using an M3 screw) using your own grounding lug. Follow these steps to mount the controller in a 2-post equipment rack: Step 1 Attach one of the front brackets to the controller using three M4 screws (see Figure 15). Follow the same steps to attach the second bracket to the opposite side. Note Only three of the four holes on each bracket are used (top, left, and right). Cisco 5500 Series Wireless Controller Installation Guide 18 78-18998-01