Cisco WUSB600N User Guide - Page 16

Chapter 3 No Wi-Fi Protected Setup If the router does not use Wi-Fi Protected Setup, proceed to the appropriate section, "Wireless Security Disabled" or "Wireless Security Enabled". Wireless Security Disabled If you connect to a network whose wireless security is disabled, then you will view this screen: Advanced Configuration Click Connect Anyway 1. Click Connect Anyway. 2. Click Finish. WPA2-Personal Security Passphrase Enter the network's Passphrase (also called a pre-shared key) of 8-63 characters. To connect to the network, click Connect. To cancel the connection, click Cancel. WPA (Wi-Fi Protected Access) If the network uses WPA Personal security, then the WPA-Personal Key Needed for Connection screen appears. Congratulations Congratulations! The Adapter is connected to the network. Wireless Security Enabled If you connect to a network whose wireless security is enabled, then you will view one of three screens. 1. Proceed to the appropriate instructions. WPA2 (Wi-Fi Protected Access 2) If the network uses WPA2 Personal security, then the WPA2-Personal Key Needed for Connection screen appears. WPA-Personal Security Passphrase Enter the network's Passphrase (also called a pre-shared key) of 8-63 characters. To connect to the network, click Connect. To cancel the connection, click Cancel. WEP (Wired Equivalent Privacy) If the network uses WEP encryption, then the WEP Key or Passphrase Needed for Connection screen appears. Dual-Band Wireless-N USB Network Adapter 13