Cisco WUSB600N User Guide - Page 22
Advanced Users, Standard Channel, Passphrase, WEP Key, TX Key
View all Cisco WUSB600N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Chapter 3 4. If you chose Infrastructure Mode, go to step 5 now. If you chose Ad-Hoc Mode, the Ad-Hoc Mode Settings screen appears. NOTE: The Adapter only supports Ad-Hoc Mode for 2.4 GHz networks: Wireless-B, Wireless-G, and Wireless-N (using 2.4 GHz). Advanced Configuration for Wi-Fi Protected Access 2. WPA is a stronger security method than WEP. WPA2 is a stronger security method than WPA. RADIUS stands for Remote Authentication Dial-In User Service. Click Next to continue, or click Back to return to the previous screen. Proceed to the section for your security method. WEP Make sure the settings you configure match the settings of your wireless network. Ad-Hoc Mode Settings - Standard Channel Select the correct channel for your wireless network. If you are unsure about which channel to use, keep the default, Auto. Click Next to continue, or click Back to return to the previous screen. 5. If your wireless network does not have wireless security, select Disabled and then click Next to continue. Proceed to step 6. Wireless Security If your wireless network has wireless security, select the method of security used: WEP, WPA Personal, WPA2 Personal, WPA Enterprise, WPA2 Enterprise, or RADIUS. WEP stands for Wired Equivalent Privacy, and WPA stands for Wi-Fi Protected Access. WPA2 stands Dual-Band Wireless-N USB Network Adapter WEP WEP Select 64-bit or 128-bit encryption. Passphrase Enter the network's Passphrase, so a WEP key is automatically generated. It is case-sensitive and should not be longer than 16 alphanumeric characters. This passphrase must match the passphrase of your other wireless network devices and is compatible with Linksys wireless products only. (If you have any non-Linksys wireless products, enter the WEP key manually on those products.) WEP Key If you do not have the Passphrase, enter the WEP key of your wireless network. For 64-bit encryption, enter exactly 10 hexadecimal characters. For 128-bit encryption, enter exactly 26 hexadecimal characters. Valid hexadecimal characters are "0" to "9" and "A" to "F". Advanced Users TX Key The default is 1. If your network's wireless router or access point uses transmit key number 2, 3, or 4, select the appropriate number. Authentication The default is Open System. For Open System authentication, the sender and the recipient do not share a WEP key for authentication. For Shared Key authentication, both the sender and the recipient share a WEP key for authentication. Click Next to continue, or click Back to return to the previous screen. 19