Clifford Arrow 2 Owners Guide - Page 9

Optional remote controlled valet mode entry and exit - test

Page 9 highlights

Optional remote controlled valet mode entry and exit You can even remotely enable or exit valet mode if you have an optional Clifford 4-button/12-channel ACG remote control. All you need to do is transmit channel 5 (one press of the side LevelShift button, then button 1). In addition to the previously noted indications, two parking light flashes will confirm that you have remotely enabled valet mode, while a single flash confirms exiting of valet mode. Keyless entry in valet mode Even in valet mode, you can still remotely convenience features. Press button 1 as if you were disarming and the doors will unlock* (indicated by one parking light flash) and the interior light will turn on*. Press button 1 again and the doors lock* (confirmed by two flashes). Button 2 can activate an option such as a remote trunk release. How to interpret the LED status indicator The LED on your car's dashboard or console will inform you of the system status: LED Condition Off On Flashing Meaning System is disarmed and in normal operating mode (i.e., valet mode is off) Valet mode is on, the vehicle can be driven or serviced without the remote control System is armed and protecting your vehicle AutoTesting™ Each time you remotely arm your Arrow II, it automatically tests all system triggers and sensors. If the hood, trunk or a door is open when you remotely arm, the system will immediately alert you of the problem by sounding 4 chirps and 4 parking light flashes instead of the usual 2 and 2 (simply disarm, shut the hood, door or trunk and re-arm to reactivate monitoring of that trigger point). Please note that the door ajar warning will not work on vehicles with delayed courtesy lights. NOTE: Since this is a warning indication, you will hear the 4 chirps even if you "silently" arm with channel 3. Automatic malfunction bypass To provide protection even if a component malfunctions, the system automatically bypasses any faulty point and arms all other triggers and sensors until you can have the system serviced by your local Authorized Clifford Dealer. Prior intrusion attempt alert If you hear three chirps when you remotely disarm, it means that a trigger or sensor was activated in your absence. * Some vehicle require optional relays. 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12

Optional remote controlled valet mode entry and exit
You can even
remotely
enable or exit valet mode if you have an optional Clifford
4-button/12-channel ACG remote control. All you need to do is transmit channel 5
(one press of the side LevelShift button, then button 1). In addition to the previously
noted indications, two parking light flashes will confirm that you have remotely
enabled valet mode, while a single flash confirms exiting of valet mode.
Keyless entry in valet mode
Even in valet mode, you can still remotely convenience features. Press button 1 as if
you were disarming and the doors will unlock* (indicated by one parking light flash)
and the interior light will turn on*. Press button 1 again and the doors lock* (confirmed
by two flashes). Button 2 can activate an option such as a remote trunk release.
How to interpret the LED status indicator
The LED on your car’s dashboard or console will inform you of the system status:
AutoTesting™
Each time you remotely arm your Arrow II, it automatically tests all system triggers
and sensors. If the
hood, trunk or a door
is open when you remotely arm, the
system will
immediately
alert you of the problem by sounding
4 chirps
and
4
parking light flashes
instead of the usual 2 and 2 (simply disarm, shut the hood,
door or trunk and re-arm to reactivate monitoring of that trigger point). Please note
that the door ajar warning will not work on vehicles with delayed courtesy lights.
NOTE: Since this is a warning indication, you
will hear the 4 chirps even if you
“silently” arm with channel 3.
Automatic malfunction bypass
To provide protection even if a component malfunctions, the system automatically
bypasses any faulty point and arms all
other
triggers and sensors until you can have
the system serviced by your local Authorized Clifford Dealer.
Prior intrusion attempt alert
If you hear three chirps when you remotely disarm, it means that a trigger or sensor
was activated in your absence.
LED Condition
Meaning
Off
System is disarmed and in normal operating mode (i.e., valet mode is off)
On
Valet mode is on, the vehicle can be driven or serviced without the remote control
Flashing
System is armed and protecting your vehicle
* Some vehicle require optional relays.
8