Clifford Concept 450 Owners Guide - Page 21

z Power Saver in Valet Mode: When the system enters Valet Mode the LED illuminates steadily. If the vehicle is not used (ignition is not turned on) for a period of one hour while the system is in Valet Mode, the LED will shut off. If the system remains in Valet Mode, the LED will come back on the next time the ignition is turned on and then back off. programming options Programming options control what your system does during normal operation, and require few or no additional parts. However, some may require additional installation labor. Following is a list of the program settings, with the factory settings in bold: z Active arming (only with the transmitter) or passive arming (automatic arming 30-seconds after the last door is closed). z Arming/disarming confirmation siren chirps on or off. z Auto-Lock on/off/rpm ON: The doors will lock three seconds after the ignition is turned on unless a door is open. RPM: The doors will lock when the engine speed increases (only availiable with Intellistart 4). z Auto-Unlock on/off: With this feature on, the doors will unlock when the ignition is turned off. z Passive door locking (with passive arming) or active door locking (only when arming with the transmitter). Passive locking allows the vehicle's doors to lock when the security system passively arms (after the 30 second countdown). This feature only works if passive arming has been programmed. 18