Clifford Concept 60 Owners Guide - Page 13
What each button/channel does
View all Clifford Concept 60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
To transmit either channel 1, 2, 3 or 4: Just press either button 1, 2, 3 or 4. For instance, to transmit channel 3, press button 3. While you transmit, the LED indicator will blink once every second: this indicates level 1. To transmit either channel 5, 6, 7 or 8: Press the LevelShift button once. This shifts buttons 1-4 to level 2 (channels 5-8). Then press the desired button within the next 7 seconds. For instance, to transmit channel 5, press the LevelShift button once, then press button 1. While you transmit, you'll notice that the LED indicator blinks twice, pauses, blinks twice, etc.: this indicates level 2. To transmit channel 9, 10, 11 or 12: Press the LevelShift button twice. This shifts buttons 1-4 to level 3 (channels 9-12). Then press the corresponding button within the next 7 seconds. For instance, to transmit channel 10, press the LevelShift button twice, then press button 2. While you transmit, you'll notice that the LED blinks three times, pauses, blinks three times, etc.: this indicates level 3. NOTE: One second after you stop transmitting level 2 or level 3 (channels 5-12), the remote control automatically returns to level 1 (channels 1-4). What each button/channel does Your Concept 60 remote controls come pre-programmed so that certain channels command certain functions. If you wish, you can actually assign any channel except 9 through 12 to any function (see pages 21-25). The following chart indicates what each remote control channel number does, and how to transmit each channel number. Factory settings of the 12 remote control channels Transmitting channel number: Causes the system to: Press the How Press LevelShift many button button? times? number 1 arm or disarm and lock or unlock the doors no - 1 optionally turn on the headlights (if the system is armed) 2 AND no - 2 optionally pop the trunk (if the system is disarmed) 3 silently arm or disarm no - 3 4 activate optional accessory function #1 no - 4 5 activate optional accessory function #2 yes once 1 6 activate optional accessory function #3 yes once 2 7 activate optional accessory function #4 yes once 3 8 activate optional accessory function #5 yes once 4 9 remotely enter or exit valet mode (see page 16) yes twice 1 10 remotely turn off optional sensor #3 (see page 17) yes twice 2 11 remotely adjust sensitivity of the Piezo Sensor's primary zone (see page 17) yes twice 3 12 remotely adjust sensitivity of the Piezo Sensor's warning zone (see page 17) yes twice 4 12