Clifford Concept 60 Owners Guide - Page 25
NOTE 1, NOTE 2, NOTE 9, NOTE 3, NOTE 4, this feature is for installers only, NOTE 7, NOTE 5, NOTE 10
View all Clifford Concept 60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Table of user-selectable features: 1 chirp = OFF, two chirps = ON. Feature Select Column 1 1st latched Column 2 2nd latched Column 3 3rd latched Column 4 4th latched Column 5 5th latched Row 1 1st momentary Sound 1: on/off info on page 20 Add new remote to channel 1 info on page 12 NOTE 1 AutoLock on/off info on page 16 Enhanced AutoArming: on/off info on page 15 Anti-carjacking: on/off info on pages 9-11 Row 2 2nd momentary Sound 2: on/off info on page 20 Add new remote to channel 2 info on page 12 NOTE 2 RPM-activated AutoLock on/off info on page 16 AutoArm & Lock: on/off info on page 15 Remote control button sequence to override anti-carjacking info on page 10 NOTE 9 Row 3 3rd momentary Row 4 4th momentary Sound 3: on/off info on page 20 Sound 4: on/off info on page 20 Add new remote to channel 3 info on page 12 NOTE 3 Add new remote to channel 4 info on page 12 NOTE 4 AutoUnLock on/off info on page 16 AutoActivate timed accessory upon remote arming: on/off this feature is for installers only 15-second entry delay: on/off info on page 15 D Set headlight duration 1sec - 2min (30sec) info on page 12 NOTE 7 FACT: on/off info on page 16 Headlight Reminder: on/off info on page 16 Row 5 5th momentary Sound 5: on/off info on page 20 Add new remote to channel 5 info on page 12 NOTE 5 QuietChirps: on/off info on page 20 Siren duration: 60/30 seconds (1/2 chirps) info on page 20 Adjust and test sensitivity of the Glass Tampering Sensor info on page 17 NOTE 10 Row 6 6th momentary Sound 6: on/off info on page 20 Erase all channels info on page 23 NOTE 6 Long-term chirp silencing: on/off info on page 20 Set a new secret disarming/valet code info on page 10 NOTE 8 NOT USED D WARNING: If you have remote window and sunroof closure, DO NOT CHANGE THIS SETTING: it requires installer-only adjustment. Changing the duration may cause damage. Please Note: There is a column 6 that contains installer-only features; do not change any of these settings. If you accidentally select column 6, turn off the ignition. NOTE 1: Transmit channel 1 (or other channel of your choosing) of the new remote control. You will hear one chirp to confirm programming of channel 1. NOTE 2: Transmit channel 2 (or other channel of your choosing) of the new remote control. You will hear two chirps to confirm programming of channel 2. NOTE 3: Transmit channel 3 (or other channel of your choosing) of the new remote control. You will hear three chirps to confirm programming of channel 3. NOTE 4: Transmit channel 4 (or other channel of your choosing) of the new remote control. You will hear four chirps to confirm programming of channel 4. NOTE 5: Transmit channel 5 (or other channel of your choosing) of the new remote control. You will hear five chirps to confirm programming of channel 5. NOTE 6: When you hear one chirp, all remotes will have been erased from the system memory. You must now add the new and/or existing remote controls to the system (i.e., program channels 1-5 of each remote that will be used with your Concept 60). NOTE 7: The headlight timer starts as soon as you select this feature. When the duration you wish has been reached, press button 1 on the remote control. You will hear two chirps to confirm the new headlight timer duration. NOTE 8: Immediately flip the switch to its latched position, then: a. Enter the new code that you wish to use. The system will sound the same number of chirps as the digit you choose when you move the switch to the latched side (e.g., if the first digit is 4, you'll hear four chirps when you press the latched side). b. Make sure to return the switch to its center position when complete. c. Wait 3 seconds until you hear 2 chirps, indicating the new code has been accepted. d. Turn the ignition off. You'll hear 3 chirps and the LED will turn off. e. VERY IMPORTANT: You must immediately test your new disarming/valet code: Turn the ignition on, enter your new code, then flip the switch to its latched position. The LED will illuminate. If it does not, the new code you programmed and the one you just entered do not match. The system has reverted to the previous code. NOTE 9: Transmit the first channel of your choice (any channel 1-12). You will hear a one-chirp confirmation. Transmit the second channel you wish (you'll hear two chirps). You may now use this combination to turn off the 20-second anti-carjacking countdown. NOTE 10: Close all windows, turn off the ignition (you'll hear 3 chirps), then exit the vehicle and close the doors. Sharply tap the driver's side window with a coin. A single chirp will confirm that the sensor detected the tap. Press button 2 to increase sensitivity (each press is confirmed with a higher and higher chirp) and/or button 4 to decrease 24 25 © Copyright Clifford Electronics, Inc., 1994 31-705A/C6OM/1294