Clifford XL2000 Owners Guide - Page 9
AntiScan, Automatic Fault-Proof Starter Interrupt, Multi-Level Chirp Control, Remote Headlight - programming
View all Clifford XL2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
AntiScan Car thieves use electronic scanners that rapidly transmit one remote control code after another to defeat ordinary alarms. AntiScan prevents scanners from disarming your system. Automatic Fault-Proof Starter Interrupt The system automatically prevents engine starting while the system is armed but allows you to start it even in the unlikely event of a full system failure (other manufacturer's alarms may leave you stranded). Multi-Level Chirp Control Whenever you wish, you may lower the volume or completely silence the system's arm/disarm chirps. The short-term and one-time chirp muting capabilities are especially valuable when parking late at night in a quiet residential area. You have several choices: Chirp Volume Control: Lets you lower the volume of the chirps or restore them to full volume. See User-Selectable Features on pages 9-10. Extended Chirp Silencing: Lets you completely silence the chirps until you wish to restore them. See User-Selectable Features on pages 9-10. Short-Term Chirp Muting: Lets you silence the chirps for a single arm-anddisarm cycle. To enable short-term chirp muting, simply turn the vehicle's ignition switch rapidly ON then OFF. The next time you arm and later disarm the system, there will be no chirps. After which, the chirps are restored. One-Time Remote Chirp Muting: The most simple of all. To remotely arm or disarm the alarm silently, press button III (switch up) on the remote control. Remote Headlight Activation OR Window/Sunroof Closure The system's built-in timer can control one of two great features when the system is in its armed state (these features require optional wiring): 5 Remote Controlled Headlight Activation OR 5 Remote Controlled Window/Sunroof Closure (available only on certain vehicles) Please see page 4: "To Activate an Option when the Alarm is Armed." If connected to the headlights, you may set the timer duration to any interval between 1 second and 2.5 minutes. See the User-Selectable Features section on pages 9-10. WARNING: If your built-in timer controls window/sunroof closure in your car DO NOT change the timer setting! This requires installer-only programming. Changing the value will adversely effect operation and may cause damage. 8