Cobra 25 LX Operation Manual - Page 7

Operation Operation To TransCmH9/1i9t CB / PA NB SIG Caution! Be sure the antenna is properly connected to the radio before transmitting. Prolonged transmitting without an antenna, or a poorly matched antenna, could cause damage to the transmitter. T1 o T2 r3an4 sTmX PW itR 1 3 5 7 9 +30dB VOL SQ OFF TX RX CH 9 / 19 MCEBN/UPPAU SH ENTER NB SIG SCAN / M SCAN Setting Dynamike® 1 2 3 4 TX PWR MEM NB TX RX ThDisIMc/oESnCtrols the microphone sensitivity SCAN / M SCAN (outgoing audio level). DIM / ESC 1 3 5R7F9G+A3IN0dB VOL SQ DYNAMIKE MENU PU SH ENTER MEM NB RF GAIN DYNAMIKE MIN MAX MIN OFF MIN MAX MIN Be sure to read the F.C.C. Rules and Regulations included with this unit before transmitting. 1 Select desired channel. Transmit PUSH & HOLD 3 Initially, set fully clockwise so that maximum voice volume is available. Dynamike may have to be reduced in some conditions. Setting Dynamike® 2 Push and hold mic button to transmit. Transmitter is now activated. When transmitting, hold the microphone two inches from your mouth and speak in a clear, normal voice. Release to receive. 12 13