Cobra 29 LTD NW 29 LTD Manual - Page 7

PA Public Address, Base Station Operation, From 120V AC House Current, Temporary Mobile Operation

Get Cobra 29 LTD NW PDF manuals and user guides View all Cobra 29 LTD NW manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

Operation PA (Public Address) 1. Connect an external PA speaker to the PA jack on the rear panel. NOTE: The speaker should have 8-ohm impedance and be rated to handle at least 4.0 watts. 29 LTD CLASSIC 2. Set the CB/PA switch to the PA position. NOTE: The speaker should be directed away from the microphonFeM to prevent acoustic NfOeRMeAL dback. PUSH AM/FM 3. Push and hold the microphone button and speak in a normal voice. Your voice will now transmit through the PA speaker. 12 English 4. Adjust the PA speaker volume with the 29 LTD CLASSIC Dynamike® control. FM NORMAL PUSH AM/FM Operation Base Station Operation (From 120V AC House Current) To operate the transceiver from home or office you will need a 13.8 volt DC Power Pack rated at a minimum of 2 amps, and a properly installed base station antenna. WARNING: Do not attempt to operate this transceiver by connecting it directly to 120VAC. 1. Simply connect the red (+) and black (-) leads of the transceiver to the corresponding terminals of the power pack. 2. Plug the power cable into the back of the unit marked "Power". Be sure to observe polarity markings. 3. Connect a properly installed and matched base station antenna. Temporary Mobile Operation For temporary mobile operation you may want to purchase an optional automobile power adapter from your Cobra dealer. This adapter and a magnetic mount antenna allow you to quickly "install" your transceiver for temporary use. 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
Operation
Operation
12
English
13
29 LTD CLASSI
N
29 LTD CLASSIC
PA (Public Address)
1.
Connect an external PA speaker to the
PA
jack
on the rear panel.
NOTE:
The speaker should have 8-ohm
impedance and be rated to handle at least
4.0 watts.
2.
Set the
CB/PA
switch to the
PA
position.
NOTE:
The speaker should be directed away
from the microphone to prevent acoustic
feedback.
3.
Push and hold
the microphone button and
speak in a normal voice. Your voice will
now transmit through the PA speaker.
4.
Adjust the PA speaker volume with the
Dynamike
®
control.
Base Station Operation
(From 120V AC House Current)
To operate the transceiver from home or
office you will need a
13.8 volt DC Power
Pack
rated at a minimum of
2 amps
, and a
properly installed base station antenna.
WARNING:
Do not attempt to operate this
transceiver by connecting it directly to 120VAC.
1.
Simply connect the
red (+)
and
black (-)
leads of the transceiver to the
corresponding terminals of the power
pack.
2.
Plug the power cable
into the back of
the unit marked “Power”.
Be sure to
observe polarity markings
.
3.
Connect a properly installed and matched
base station antenna.
Temporary Mobile Operation
For temporary mobile operation you may want
to purchase an optional automobile power
adapter from your Cobra dealer. This adapter
and a magnetic mount antenna allow you to
quickly “install” your transceiver for temporary
use.