Cobra 29 LX BT Operating Instructions - Page 13

Operation Operation Setting Display Setting Display Color Mode Color Mode 1 Press Menu/Enter knob and scroll down to select Display Color. NB /ANL NB/ANL SWR 1.5 2 3 ANL 2CAL TX WX AUTO SCAN SCAN CH 9/ 19 S/ RF SWR /CAL S/RF SWR CAL RF SIG VOL SQ 1 RX DISPLAY COLOR MEM SCAN BRIGHTNESS CB / WX 3 5 79 DYNAMIKE +30dB PMrEeNsUsP UaSnH dENrTeERleaMseEMMWReXFn!GuA/INEnterDEtLoTAsTeUtNtEhe TcoBAloCKr. DIM ESC SWR CAL 3 OFF MIN MIN MAX OFF Setting Brightness Mode Press Menu/Enter knob to select Set Brightness Rotate Menu/Enter knob clockwise to Select Brightness. Press Menu/Enter knob to select DayBright. Turn Menu/Enter clockwise to increase brightness and turn counter-clockwise to decrease brightness. Setting Brightness Mode Note If an attempt is made to exceed the highest or lowest brightness levels, 1 error beep will be heard. Note Exit will return to menu mode. ESC will exit and return to CB Standby. To set the day bright level, turn the Menu/Enter knob clockwise to a desired setting and then press Menu/Enter. To set the Night-Dim level, repeat instructions above then select Night-Dim. Note To select day or night levels, press and release Dim/Escape button once levels are set. TURN CH KNOB TO SET LEVEL Rotating Menu/Enter knob clockwise changes the display color from green to blue to amber to red Press Menu/Enter knob again to exit routine. then back to green. Turn NightWatch Illumination On-Off-Hi-Lo Turn NB /ANL 4 NightWatch Note NB/ANL SWR 1.5 2 3 Illumination Select EXITANtLo return to S/ RF On/Off main menSSu/WR.RFPrReFss Dim/Escape SbWuRt/tCoAnL to CrAeLturnSItGo C1 B m3 od5e7. 9 VOL SQ DYNAMIKE CAL TX TURN CH KNOB TO SCAN CH 9/ 19 RX SET COLORNB/ANL MEM SCAN EXIT NB/ANL SCWB/RWX1.5 DIM 23 +30dB PrMeEsN Us PMU SeH nENuTE/REntMeErM to exit routine. WX ! knRFoGbAIoNr ANL S/ RF S/RF RF escDaEpLTeA SWR /CAL bTUSuCW NAtELRtonSTIaGBgA1aCKin3 ESC SWR C5AL7 9 VOL SQ DYNAMIKE Press Menu/Enter knob and scroll down to select NW Lighting. CAL TX RX +30dB MENU PU SH ENTER NW LIGHTING CONTRAST RADIO CHECK MEM WX ! NW IS SET HI HI-LROF-GAOINFF DELTA TUNE SCAN MEM SCAN CB / WX T BACK CH 9/ 19 DIM ESC SWR CAL Note To select HI-LO-OFF, turn menu knob to select and press and release Enter knob. OFF MIN MIN MAX OFF Press Menu/Enter knob again to exit routine. OFF MIN MIN MAX OFF 20 21