Compaq 400338-001 Compaq Server Console Switch User Guide - Page 30
Standard 1U Installation, pattern on the mounting rails.
UPC - 743172745156
View all Compaq 400338-001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Hardware Installation Standard 1U Installation To install the console switch: 1. Attach the slide rail brackets to the console switch, using the two screws on each side. 2. Use the template that was shipped with the component to mark the location of the mounting hardware. a. Push back the tabs (marked ) on the top of the template and place them in the correct holes in the mounting rails. b. Match up the hole pattern indicated on the sides of the template with the hole pattern on the mounting rails. c. Measuring from the top of the component immediately below the new component, place the template against the front and rear of the rack frame to mark the attachment points for the mounting rails and rear cage nuts. Figure 2-13: Measuring with the rack template Compaq Server Console Switch User Guide 2-11