Compaq 470007-802 Getting Started - Compaq Deskpro Family of Personal Computer - Page 6

Converting to NTFS The hard drive included with a Windows NT 4.0 Workstation model contains a primary FAT16 partition on which the operating system and Compaq software are installed. The rest of the hard drive is divided into one or more additional partitions. Because FAT16 only supports partitions up to 2 GB, converting to NTFS will allow hard drives larger than 2 GB to be partitioned as one large drive. ✎ The largest NTFS partition possible is 7.5 to 8.0 GB, depending on the hard drive, with a second NTFS partition created from the remaining space on the drive. If the computer does not have a CD-ROM drive, other means of installation, such as a network share, will be needed. CAUTION: The following procedures will remove all of the software applications and data files from your hard drive. Be sure to back up any data files you have created prior to converting from FAT16 to NTFS, or you will not be able to restore them. You will be able to restore the original operating system and Compaq software from the Compaq Restore CD. The operating system (without Compaq software or optimized drivers) may be restored from the operating system installation CD or diskettes. Method 1 (Recommended) Insert the Compaq Restore CD, version 2.0 or higher, into the CD-ROM drive and turn on or restart the computer. Read and follow the instructions that appear on the screen to change the drive partitioning. Getting Started 1-3