Compaq BL10e HP ProLiant BL e-Class Integrated Administrator User Guide
Compaq BL10e - HP ProLiant - 512 MB RAM Manual
UPC - 613326445501
View all Compaq BL10e manuals
Add to My Manuals
Save this manual to your list of manuals |
Compaq BL10e manual content summary:
- Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 1
HP ProLiant BL e-Class Integrated Administrator User Guide May 2003 (Fourth Edition) Part Number 249070-004 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 2
12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license. HP ProLiant BL e-Class Integrated Administrator User Guide May 2003 (Fourth Edition) Part Number 249070-004 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 3
About This Guide Audience Assumptions...ix Important Safety Information ix Symbols on Equipment ...ix Symbols in Text...xi Related Documents...xii Getting Help ...xii Technical Support ...xii HP Website ...xiii Authorized Reseller xiii Reader's Comments ...xiii Chapter 1 HP ProLiant BL e-Class - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 4
Navigation ...3-3 Top Panel...3-3 Left Panel ...3-5 Deck Panel...3-6 Enclosure Tab ...3-6 Enclosure Information 3-7 Network Configuration 3-13 SNMP Configuration 3-16 Virtual Connector 4-2 Operating the Command Line Interface 4-3 iv HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 5
Targets 5-28 Removing Trap Targets 5-29 Chapter 6 Performing Common Administrative Tasks Managing Server Blade Bays 6-2 Opening a Remote Console Session to a Server Blade 6-2 Accessing the ROM-Based Setup Utility for a Server Blade 6-4 Reviewing Activity for a Server Blade 6-6 HP ProLiant - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 6
Enclosure Warning Messages B-2 Server Blade Bay Warning Messages B-3 Administration Warning Messages B-3 Error Messages ...B-4 Enclosure Error Messages B-4 Server Blade Bay Error Messages B-4 Administration Error Messages B-5 vi HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 7
E Factory Default Settings Enclosure ...E-2 Users ...E-2 Groups ...E-3 Network ...E-3 Protocol ...E-3 Appendix F Time Zone Settings Universal ...F-2 Africa...F-3 Asia...F-4 Europe ...F-6 Oceania...F-7 Polar ...F-9 The Americas ...F-10 Appendix G Open Source Availability Index HP ProLiant BL e-Class - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 8
for advanced operation, troubleshooting, and future upgrades for the HP ProLiant BL e-Class Integrated Administrator. Audience Assumptions This guide is intended for users with access to the ProLiant BL e-Class Integrated Administrator. It assumes that the server blade system hardware is installed - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 9
enclosure. Refer all maintenance, upgrades, and servicing to qualified personnel. This symbol indicates the presence of electric shock hazards. The area contains no user or field serviceable and guidelines for manual material handling. x HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 10
in Text These symbols may be found in the text of this guide. They have the following meanings. WARNING: Text set off in this this manner presents additional information to emphasize or supplement important points of the main text. HP ProLiant BL e-Class Integrated Administrator User Guide xi - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 11
ProLiant Servers • QuickSpecs Getting Help If you have a problem and have exhausted the information in this guide, you can get further information and other help in the following locations. Technical Support In North America, call the HP Technical Support Phone Center at 1-800-652-6672. This service - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 12
. • In Canada, call 1-800-263-5868. • Elsewhere, see the HP website for locations and telephone numbers. Reader's Comments HP welcomes your comments on this guide. Please send your comments and suggestions by e-mail to [email protected]. HP ProLiant BL e-Class Integrated Administrator User - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 13
console connections to all server blades in the enclosure. The ProLiant BL e-Class Integrated Administrator is a standard component of ProLiant BL e-Class systems. The Integrated Administrator provides enclosure health, server blade health, and remote server manageability. Integrated Administrator - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 14
Administrator, refer to: www.compaq.com/products/servers/proliant-bl/e-class/integrated-admin.html Integrated Administrator Features The Integrated Administrator provides the following functionality to deliver state-of-the-art management of the enclosure and server blades: • Dedicated LAN network - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 15
HP ProLiant BL e-Class System Software Features If a server blade does not respond, this feature enables an administrator to initiate a cold reboot to bring the server blade back online. The Integrated Administrator can be used to remotely operate a power button of a server blade supports services - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 16
utility adds support for a new device type, the management processor. All Integrated Administrators (in ProLiant BL e-Class enclosures) on the network are discovered in the Insight Manager 7 utility as management processors. The management processors are associated with the server blades they manage - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 17
information for every component in the enclosure. Overview of ProLiant BL e-Class Software Tools ProLiant BL e-Class server blade systems also support the following tools and utilities to facilitate monitoring and management of the enclosure: • ROM-Based Setup Utility (RBSU) RBSU performs a wide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 18
with the enclosure, or go to: www.hp.com/servers/rdp • Insight Manager 7 Insight Manager 7 is an easy-to-use, intuitive software utility designed for collecting server information, including fault conditions, performance, security, remote management, and recovery services. The ProLiant BL e-Class - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 19
RMON and SNMP manageability are supported with an SNMP-based scripting utility and sample scripts. The interconnect switch configuration can also be saved to a TFTP server as backups and as templates for preconfiguring other switches. HP ProLiant BL e-Class Integrated Administrator User Guide 1-7 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 20
HP ProLiant BL e-Class System Software Features The interconnect switch is compatible with industry standards and has full for support for IEEE 802.1Q VLANS. 1-8 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 21
an enclosure, including functions specific to the server blades housed within setup and management of the Integrated Administrator: • Each Integrated Administrator ships with a unique preconfigured Administrator password and host name. HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 22
and provides external connectivity using two connectors on the rear panel. CAUTION: Do not plug anything into the enclosure link connectors. They are reserved for future use and are not designed to accept a 10/100 Ethernet connector. 2-2 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 23
reset button Console (serial) connector for local access to the command line interface using a laptop computer Integrated Administrator health LED Enclosure link connectors (see previous Caution ) Enclosure Unit Identification button HP ProLiant BL e-Class Integrated Administrator User Guide 2-3 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 24
Administrator locally using the serial connector on the rear panel of the enclosure using a local client device, such as a laptop computer. The local bits: 1 • Flow control: none • Emulation: VT100 • Backspace key sends Ctrl-H 2-4 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 25
Administrator module. IMPORTANT: For security reasons, HP recommends changing the Administrator password when accessing enclosure). Figure 2-2: Installing a local client device to the Integrated Administrator (serial) console connector HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 26
in this document, see Appendix A, "Command Line Conventions." - If a DHCP server is attached to the network, determine the Integrated Administrator IP address. Enter the following using a web browser, Secure Shell, Telnet, or SNMP. 2-6 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 27
window displays the certificate information, as shown in Figure 2-4. Installing the certificate to your browser prevents the security alert message from displaying in the future. HP ProLiant BL e-Class Integrated Administrator User Guide 2-7 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 28
in Chapter 7, "Performing Advanced Functions." Figure 2-4: Certificate Information window IMPORTANT: If the certificate is removed from your browser, the security alert message is displayed again. 2-8 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 29
and password. Use the default user name and password from the settings tag attached to the interconnect tray and click Log In. Figure 2-5: Login screen HP ProLiant BL e-Class Integrated Administrator User Guide 2-9 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 30
window The Integrated Administrator summary window provides general information about the Integrated Administrator, such as the user currently logged on, enclosure name and status, and Integrated Administrator IP address and name. 2-10 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 31
HP recommends performing the following tasks: • Change the Administrator password • Set the date and time • Name the enclosure and rack • Set up groups, users, and access privileges For detailed instructions Integrated Administrator. HP ProLiant BL e-Class Integrated Administrator User Guide 2-11 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 32
3 Web-Based User Interface This chapter provides information for navigating the Integrated Administrator Web-based user interface. NOTE: Values appearing in the screens of this chapter are for illustrative purposes only. HP ProLiant BL e-Class Integrated Administrator User Guide 3-1 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 33
is not supported from the services, you need to configure a static IP address. See the "Accessing the Command Line Interface Locally" section in Chapter 4, "Command Line Interface." Figure 3-1: Viewing the Login screen 3. Enter the user name and password at the Login prompt. 3-2 HP ProLiant - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 34
: • Top panel • Left panel • Deck panel Top Panel Figure 3-2 illustrates the location of the top panel. Figure 3-2: Top panel of the Web-based user interface HP ProLiant BL e-Class Integrated Administrator User Guide 3-3 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 35
• Tabs The Integrated Administrator top panel provides real-time event notifications for an enclosure according to two categories: caution and critical. When an event occurs, the • Log Out - Logs you out of the Web-based user interface 3-4 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 36
which screens are available under each tab. Information appearing in the left panel depends on which tab the user chooses from within the top panel. HP ProLiant BL e-Class Integrated Administrator User Guide 3-5 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 37
panel depends on the option chosen by the user from within the top panel and the left panel. Enclosure Tab The Enclosure tab provides access to the following screens: • Enclosure Information • Network Configuration • SNMP Configuration 3-6 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 38
Enclosure Information screen enables an enclosure administrator to update the rack name, enclosure name, asset tag, time zone, date, and time, as well as observe the status and general information for every component in the enclosure. HP ProLiant BL e-Class Integrated Administrator User Guide 3-7 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 39
E, "Factory Default Settings." Status of the enclosure Redundant: all fans are functional. Non-redundant: at least one fan is not functional. Status of fans 1 through 4 The spare number for the fans installed in the enclosure continued 3-8 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 40
product type Part number for the enclosure Serial number for the enclosure Asset tag Only enclosure administrators have write access to this field. For the default asset tag value, see Appendix E, "Factory Default Settings." continued HP ProLiant BL e-Class Integrated Administrator User Guide 3-9 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 41
of the enclosure The IP address of the Integrated Administrator Shows the status of DHCP Shows the status of Dynamic DNS This field only appears if DHCP is enabled. The MAC address of the Integrated Administrator continued 3-10 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 42
time zones listed Time zone assigned to the enclosure For the default time zone, see Appendix E, "Factory Default Settings." For a list of all supported time zones, see Appendix F, "Time Zone are grayed out and cannot be modified. HP ProLiant BL e-Class Integrated Administrator User Guide 3-11 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 43
zone text box • Cancel - Cancels all changes and closes the window For more information on accepted time zones, refer to Appendix F, "Time Zone Settings". 3-12 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 44
an enclosure. These settings are specific to the enclosure and do not affect the network configurations for server blades. Two buttons appear at the bottom of this screen: • Apply - Saves changes made to the screen • Cancel - Restores all fields on the screen to their original values HP ProLiant BL - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 45
the default settings of the system , see Appendix E, "Factory Default Settings." Gets the IP address of the Integrated Administrator from a DHCP server Sets a static IP address of the Integrated Administrator Determines whether the Integrated Administrator uses Dynamic DNS Static IP address for the - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 46
Administrator (optional field if Static IP is selected) The IP address for the primary DNS server (optional field if Static IP is selected) The IP address for the secondary DNS server (optional field if Static IP is selected) HP ProLiant BL e-Class Integrated Administrator User Guide 3-15 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 47
These settings are specific to the enclosure and do not affect the network configurations for server blades. Two buttons appear at the bottom of this screen: • Apply - Saves changes made to the screen • Cancel - Restores all fields on the screen to their original values 3-16 HP ProLiant BL e-Class - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 48
contact of the enclosure For the default SNMP contact, see Appendix E, "Factory Default Settings." Displays the SNMP read community string If this is left blank, "public" is assigned. For the default Read community string, see Appendix E, "Factory Default Settings." continued HP ProLiant BL e-Class - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 49
Settings." Add Adds an IP address to the list of trap destinations Remove Removes the selected IP addresses from the list of trap destinations 3-18 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 50
to facilitate troubleshooting by technicians in the data center. The Toggle On/Toggle Off button remotely changes the state of the enclosure Unit Identification LED. Figure 3-10 describes the information presented in the Enclosure Power area of the Virtual Buttons screen: HP ProLiant BL e-Class - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 51
: Whenever possible, HP recommends that you use the operating system shutdown procedures before powering down a server blade or enclosure. After the enclosure is powered off, powering on can only occur by local access to the system. 3-20 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 52
the enclosure. Two buttons appear at the bottom of this screen: • Refresh - Refreshes the screen • Clear - Clears the system log Figure 3-11 describes the information presented in the System Log screen: Figure 3-11: System Log screen HP ProLiant BL e-Class Integrated Administrator User Guide 3-21 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 53
assignment of groups to server blade bays, as well as monitor the status of each server blade installed in the enclosure. Group administrators and group members with permissions can view the server blade bays assigned to their groups. 3-22 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 54
Web-Based User Interface Figure 3-12 and Table 3-5 describe the information presented in the Bay List screen: Figure 3-12: Bay List screen HP ProLiant BL e-Class Integrated Administrator User Guide 3-23 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 55
with permissions Enclosure administrators and group administrators with permissions Enclosure administrators, group administrators, and group members with permissions Enclosure administrators only Enclosure administrators only 3-24 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 56
to another, you must first unassign the server blade; otherwise the command does not execute. The Assign to Group drop-down box contains all groups within the enclosure to determine the group with ownership of the server blade bay. HP ProLiant BL e-Class Integrated Administrator User Guide 3-25 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 57
you must have the server blade health driver installed. Table 3-7 describes the information presented on the Bay Information screen for all enclosure administrators and for group members and group with rights to the server blade bay. 3-26 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 58
of the server blade Asset tag number of the server blade ROM version on the server blade Type of processor on the server blade Speed associated with the server blade processor Amount of memory installed on the server blade continued HP ProLiant BL e-Class Integrated Administrator User Guide 3-27 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 59
2000 Server service, located at www.compaq.com/support/files/server Enclosure administrators and group administrators with access to the bay can click Remote Console to open a remote text-based console to the server blade in the bay. 3-28 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 60
Console screen. Figure 3-15: Remote Console screen (bay 5 shown) For information on establishing remote console connectivity, see the "Enabling Remote Console Sessions to Server Blades" section in Chapter 5, "Setting Up the System." HP ProLiant BL e-Class Integrated Administrator User Guide 3-29 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 61
enables group administrators and enclosure administrators to reboot, power off, or identify the server blade with the following items: • The Toggle On/Off button remotely changes the state of the server blade Unit Identification LED. 3-30 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 62
the server blade that occurred while no one was connected to the console. For security reasons, console output during a user connection session is not logged. The Refresh button refreshes the console log for the current server blade. HP ProLiant BL e-Class Integrated Administrator User Guide 3-31 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 63
." Under the Administration tab, you can access the following screens: • User List • Group List • Add User • Add Group • View/Modify User • View/Modify Group 3-32 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 64
presented in the User List screen. Figure 3-17: User List screen The User List screen enables an appropriate group administrator or enclosure administrator to observe and update user access to groups and server blade bays. HP ProLiant BL e-Class Integrated Administrator User Guide 3-33 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 65
See Appendix E, "Factory Default Settings," for factory default user accounts. User's full name Shows if the user is an enclosure administrator Shows if the user's account is enabled Shows the groups in which the user has membership 3-34 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 66
3-10 describe the information presented in the Group List screen. Figure 3-18: Group List screen The Group List screen enables an enclosure administrator to observe and update the assignment of groups and users to server blade bays. HP ProLiant BL e-Class Integrated Administrator User Guide 3-35 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 67
Assigned Bays Group Members Description Group name Server blade bays that the group owns Users with membership in the group Add User IMPORTANT: Only enclosure administrators have access to this area of the Integrated Administrator. 3-36 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 68
to create a user profile, including group and server blade bays assignments. Two buttons appear on this screen: • Apply-Saves changes made to this screen • Cancel-Restores all fields on this screen to their original values HP ProLiant BL e-Class Integrated Administrator User Guide 3-37 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 69
restriction is not case-sensitive. User's password User's password Determines if the user has enclosure administrator rights Determines if the user's account is enabled Full name of the user Optional user contact information continued 3-38 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 70
administrators or View rights for group members Removes the user from the selected groups in the Group Membership text box Add Group IMPORTANT: Only enclosure administrators have access to this area of the Integrated Administrator. HP ProLiant BL e-Class Integrated Administrator User Guide 3-39 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 71
to create a group profile, including user and server blade bays assignments. Two buttons appear on this screen: • Apply-Saves changes made to this screen • Cancel-Restores all fields on this screen to their original values 3-40 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 72
Bay 1-Bay 20 Select All Clear All Group Membership Area User Names All users and enclosure administrators are listed. Group Members X number of users (all users that are members all users that are members of the group continued HP ProLiant BL e-Class Integrated Administrator User Guide 3-41 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 73
Group screen the provides same functions and has the same access as the Add Group screen. See the "Add Group" section in this chapter. 3-42 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 74
of the enclosure is imminent . Two buttons appear on this screen: • View Event Details-Navigates to the appropriate screen within the Integrated Administrator to view more details • Clear All Events-Clears all events from event list HP ProLiant BL e-Class Integrated Administrator User Guide 3-43 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 75
event: • Severity • Source • Date • Time • Event Details For detailed information regarding the Event List, including a comprehensive list of event messages, see Appendix D, "Event Details." 3-44 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 76
screen allows anyone to view information about the interconnect tray. It allows enclosure administrators to connect to the remote console of one of the interconnect or Failed Description Status of the interconnect tray continued HP ProLiant BL e-Class Integrated Administrator User Guide 3-45 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 77
switch is installed) Switch A button Opens a new window to the remote console of Switch A Switch B button Opens a window to the remote console of Switch B 3-46 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 78
User account commands - Enclosure network configuration commands - Enclosure management commands - Server bay management commands • provides a comprehensive listing of the commands supported by the Integrated Administrator. HP ProLiant BL e-Class Integrated Administrator User Guide 4-1 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 79
a Telnet or Secure Shell application and enter the IP address or DNS name for the enclosure you wish to access. CAUTION: Using Telnet instead of Secure Shell means your remote session, login prompt. 3. Enter the user name and password. 4-2 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 80
to continue the session before time runs out; but you can terminate the session and start another one. Restrictions None None None None None None HP ProLiant BL e-Class Integrated Administrator User Guide 4-3 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 81
for server blade bays to which they have access. Only enclosure administrators may execute this command. Only enclosure administrators may execute this command. Only enclosure administrators may execute this command. Only enclosure administrators may execute this command. continued 4-4 HP ProLiant - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 82
address> | ] Sends enclosure administrators may execute this command. The must be in the form where ### ranges from 0 to 255. None None Only the "Administrator" account may execute this account. None continued HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 83
this command. Group members and group administrators may only see the sessions for bays assigned to groups to which they belong. Enclosure administrators see all sessions. None Only enclosure administrators may execute this command. 4-6 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 84
SCRIPT MODE is enabled, the password is not optional and must be provided. Restrictions Only enclosure administrators may execute this command. A maximum of 20 groups may be added to the for factory default user accounts. continued HP ProLiant BL e-Class Integrated Administrator User Guide 4-7 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 85
Administrator" account cannot be disabled. Only enclosure administrators may execute this command. The is case-sensitive. Only enclosure administrators may execute this command. The is case-sensitive. continued 4-8 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 86
command is not valid in SCRIPT MODE if password is not specified. Restrictions Only enclosure administrators may execute this command. The is case-sensitive. The " and can include all printable characters. continued HP ProLiant BL e-Class Integrated Administrator User Guide 4-9 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 87
command is not valid in SCRIPT MODE if password is not specified. Restrictions Only enclosure administrators may modify another user's contact information. The is case- can include all printable characters. continued 4-10 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 88
. The "Administrator" account cannot have enclosure administrator rights taken away. The is case-sensitive. Only enclosure administrators may execute this command. The and are case-sensitive. HP ProLiant BL e-Class Integrated Administrator User Guide 4-11 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 89
Only enclosure administrators may execute this command. Only enclosure administrators may execute this command. Only enclosure administrators may execute this command. Only enclosure administrators may execute this command. continued 4-12 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 90
DNS server addresses These servers are only used if the system is currently configured to use a static IP address. Only enclosure administrators may execute this command. The and must be in the form where ### ranges from 0 to 255. continued HP ProLiant BL - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 91
This gateway is only used if the system is configured to use a static IP address. Only enclosure administrators may execute this command. The needs to be in the form where enclose the information in quotes. continued 4-14 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 92
status of the enclosure. None SHOW SNMP Displays the SNMP system name, location, and contact; read community name; write community name; and a list of the trap destinations. Only enclosure administrators may execute this command. HP ProLiant BL e-Class Integrated Administrator User Guide 4-15 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 93
enclosure system log Performs a graceful shutdown of the enclosure. Each blade is first gracefully shutdown. If the FORCE argument is given, the enclosure and all blades be disabled before manually setting the date and time. continued 4-16 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 94
this command. The must be 1-32 characters long and includes all alphanumeric, dash, and underscore characters. The default rack name is "UnnamedRack." Only enclosure administrators may execute this command. continued HP ProLiant BL e-Class Integrated Administrator User Guide 4-17 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 95
the health, Integrated Administrator health, and unit identification LED of the enclosure. Under a power status heading, this command displays the power status and capacity. Restrictions None None None None None None continued 4-18 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 96
server over the network and uses the image to upgrade the firmware of the enclosure. Restrictions None None Only enclosure administrators may execute this command. None Only enclosure flash image to download. continued HP ProLiant BL e-Class Integrated Administrator User Guide 4-19 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 97
for the ProLiant BL10e server blade ROM. Terminates a Terminal session from the enclosure. This is not a graceful termination. The connected user loses any unsaved work. Opens a remote console session to the server blade with that server blade bay number. A server blade can only support one remote - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 98
a BIOS version of 06/15/02 or greater of the ProLiant BL10e Server blade ROM. Adding an optional boot argument forces the blade to abandon the regular boot order and forces a boot using the specified method. Restrictions Only enclosure and group administrators may execute this command. Only - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 99
for the ProLiant BL10e server blade ROM. Restrictions Only enclosure and group administrators may execute this command. Only enclosures and administrators may execute this command. Only enclosure and administrators may execute this command. continued 4-22 HP ProLiant BL e-Class Integrated - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 100
or failed), and Unit Identification LED (On or Off) for the server blade. Restrictions Only enclosure and group administrators may execute this command. Group members and group administrators only the bays in their groups. continued HP ProLiant BL e-Class Integrated Administrator User Guide 4-23 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 101
screen if more information is available to display. The system log of the server blade is not stored between reboots, so the information only includes what has taken their groups. Only enclosure administrators may execute this command. 4-24 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 102
server blade bay membership has been changed for a group with at least one user. Enclosure Event Messages Enclosure Shutdown The enclosure is being shutdown. Enclosure Status The state of a thermal sensor has changed. continued HP ProLiant BL e-Class Integrated Administrator User Guide 4-25 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 103
the enclosure. Blade Removed A server blade was removed from the enclosure. Blade Status Change Health driver detected a change in status due to a change in the state of one or more hardware components or server blade readings. 4-26 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 104
. After performing this command, you will not be able to login using public keybased authentication. Capability Exclusive to the Command Line Interface None All Only enclosure administrators may execute this command. continued HP ProLiant BL e-Class Integrated Administrator User Guide 4-27 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 105
password@host. Only enclosure administrators may execute this command. GENERATE CERTIFICATE REQUEST Generates a PKCS#10 certificate All request GENERATE CERTIFICATE SELFSIGNED Generates a self-signed certificate All continued 4-28 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 106
echo messages to a All {} remote IP device [ | ] If is omitted, only 5 packets are sent. Packets are from the memory of the enclosure, and the information is unrecoverable. continued HP ProLiant BL e-Class Integrated Administrator User Guide 4-29 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 107
. None SHOW SSHKEY Displays the contents of the existing Secure Shell authorized keys file that is being used for enclosure administrator key-based authentication. Only enclosure administrators may execute this command. continued 4-30 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 108
SHOW ENCLOSURE FAN [ | ALL] Displays the status, redundancy, partner, speed, and part number for the requested fan. The command line adds the fan partner. If ALL is entered, this information is shown for all fans. continued HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 109
All configuration to the specified FTP or TFTP server. CLEAR SESSION BAY Terminates a Terminal session from All the enclosure. This is not a graceful termination. The connected user loses any unsaved work. continued 4-32 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 110
. Only enclosure and group administrators may execute this command. This command requires BIOS version 06/15/02 or greater for the ProLiant BL10e server blade ROM. GENERATE NMI Generates an NMI on the specified All blade. The consequences of an NMI are operating system specific - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 111
valid on present blades and is cleared if the blade is removed. This command requires BIOS version 06/15/02 or greater for the ProLiant BL10e server blade ROM. Only enclosure and administrators may execute this command. continued 4-34 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 112
of the server blade is not enclosure administrators may execute this command. ENABLE IPSECURITY Restricts clients from being able to connect to Integrated Administrator. Only enclosure administrators may execute this command. continued HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 113
server address, NTP poll interval, NTP last update time, IP security configuration, AlertMail status, AlertMail mailbox, SMTP server address and sender domain of the enclosure. Only enclosure administrators may execute this command. 4-36 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 114
- Adding a group - Adding a user • Enabling remote console sessions to server blades • Setting up AlertMail - Adding mailbox address - Adding SMTP server address - Adding Sender Domain - Enabling AlertMail - Disabling AlertMail HP ProLiant BL e-Class Integrated Administrator User Guide 5-1 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 115
primary NTP server - Adding secondary NTP server - Setting the poll interval - Enabling NTP - Disabling NTP • Configuring SNMP support - Entering a community string - Modifying the system location - Modifying the system contact information - Adding trap targets - Removing trap targets For a detailed - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 116
to the server blade bay in which the server blade is installed. Use Table 5-1 to distinguish the various permission levels available from the ProLiant BL e-Class Integrated Administrator. Table 5-1: Permission Levels of the ProLiant BL e-Class Integrated Administrator Title Enclosure administrator - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 117
modify their profile (not their privileges) and view enclosure data. Group member User View Group members may view server blade bay data for groups in which they are The View/Modify User screen displays. 5. Click Change Password. 5-4 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 118
: 1. Click the Enclosure tab. 2. Click Enclosure Information in the left panel. 3. Click the Enclosure Name field of the Status area. 4. Type the enclosure name. 5. Click the Rack Name field of the Status area. 6. Type the rack name. HP ProLiant BL e-Class Integrated Administrator User Guide 5-5 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 119
and includes all alphanumeric, the dash, and the underscore characters. The default enclosure name is IA-XXXXXXXXXXXX where XXXXXXXXXXXX is replaced with the actual MAC address. characters. The default rack name is "UnnamedRack." 5-6 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 120
Up the System Modifying the Asset Tag Number To modify the asset tag number using the Web-based user interface: 1. Click the Enclosure tab. 2. Click Enclosure Information in the left panel. 3. Scroll down to the General area. 4. Click the Asset Tag field. 5. Type the asset tag number. Figure - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 121
characters long and includes alphanumeric, dash, and underscore characters. The default enclosure asset tag is blank. Modifying the Date and Time To modify the can only be modified using the CLI. 1. Click the Enclosure tab. 2. Click Enclosure Information in the left panel. 3. Scroll down to the - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 122
{{CC}YY} {TZ} where: • MM: month • DD: day • hh: hour (24-hour time, an integer from 0-23) • mm: minute • CC: century • YY: year • TZ: timezone HP ProLiant BL e-Class Integrated Administrator User Guide 5-9 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 123
of supported time zones, see Appendix F, "Time Zone Settings." Setting Up User Accounts IMPORTANT: Only enclosure administrators may perform this task. The ProLiant BL e-Class Integrated Administrator enables you to manage server blade bays and administer users by organizing those server blade bays - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 124
appropriate checkboxes. IMPORTANT: If a server blade bay is gray, that server blade bay is inaccessible because it already belongs to another group. Figure 5-4: Setting a new group's name, description, and rights to server blade bays HP ProLiant BL e-Class Integrated Administrator User Guide 5-11 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 125
Setting Up the System 5. To add existing users to this group: a. Select users in the User Names area. Figure 5-5: Choosing an existing user to add to a new group (user highlighted) 5-12 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 126
GROUP {DESCRIPTION} IMPORTANT: The must be 0-20 characters long and can include all alphanumeric characters, the dash, the underscore, and spaces. HP ProLiant BL e-Class Integrated Administrator User Guide 5-13 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 127
" section in this chapter. To create a user using the Web-based user interface: 1. Click the Administration tab. 2. Click Add User in the left panel. 5-14 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 128
management permissions. The optional Full Name and Contact Information fields provide the account holder's name and a readily accessible means of contact in case of emergency. HP ProLiant BL e-Class Integrated Administrator User Guide 5-15 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 129
Setting Up the System 4. To assign the user to an existing group: a. Select groups in the Group Names area. Figure 5-8: Choosing an existing group for the new user (group highlighted) 5-16 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 130
include all alphanumeric characters, the dash, and the underscore. The must be 3-8 characters long and includes all printable characters. ASSIGN ADMINISTRATOR {RIGHTS} HP ProLiant BL e-Class Integrated Administrator User Guide 5-17 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 131
the HP ProLiant Serial Console for Windows 2000 Server service, located at www.compaq.com/support/files/server The remote console feature of the Integrated Administrator enables a user to connect to the console (serial) connector of the server blade in order to access the ROM-Based Setup Utility - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 132
a server blade running Linux to use a serial console: 1. Attach the Diagnostic Adapter to the server blade you wish to configure. NOTE: The Diagnostic Adapter ships with the enclosure. 2 1 Figure 5-10: Attaching the Diagnostic Adapter HP ProLiant BL e-Class Integrated Administrator User Guide 5-19 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 133
System 2. Connect a keyboard and monitor to the Diagnostic Adapter and log into the server blade as root. 1 2 3 4 5 7 6 Figure 5-11: Components for configuring 2 connector USB 1 connector Serial connector Video connector Power button 5-20 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 134
continue with step 5. 4. If your Linux server blade uses GRUB, add the following line to the 'linux' image specification in /etc/grub.conf: append "console=tty0 server blade is accessible remotely using the Integrated Administrator. HP ProLiant BL e-Class Integrated Administrator User Guide 5-21 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 135
DISABLE ALERTMAIL * For security reasons, some SMTP servers will only forward mail if the sender's domain Enclosure boot message • IA reboot message • Fan status change • Fan inserted • Fan removed • Enclosure thermal status change 5-22 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 136
-SEQ: SUBJECT Date: Date in standard format From: Enclosure ENCLOSURE-NAME To: RECEIVER MAILBOX Where SEVERITY is one of the following: • Highest • # CRITICAL • # WARNING • # NOTICE • # INFO • Lowest HP ProLiant BL e-Class Integrated Administrator User Guide 5-23 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 137
to connect to the services provided (SSH, HTTP, TELNET, SNMP). This means that an administrator can make sure only a certain set of machines have access to Integrated Administrator. A maximum of five IP addresses can be entered. 5-24 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 138
server supporting server SET NTP SECONDARY NONE Enable NTP ENABLE NTP Disable NTP DISABLE NTP * If an NTP poll interval is not set, it will default to 720 seconds. The minimum time interval is 60 seconds and the maximum is 9999 seconds. HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 139
Community String To enter a read community or write community string using the Web-based user interface: 1. Click the Enclosure tab. 2. Click SNMP Configuration in the left panel. 3. Click the Read Community or Write Community field. 5-26 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 140
location information using the Web-based user interface: 1. Click the Enclosure tab. 2. Click SNMP Configuration in the left panel. 3. Set and supports all the alphanumeric characters, the underscore, the dash, and spaces with quotes. HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 141
address> must be in the form where ### ranges from 0 to 255. The Integrated Administrator only supports v1 traps and directs the traps to SNMP port 162 by default. A maximum of eight IP addresses can be added to receive SNMP traps. 5-28 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 142
appropriate field of the SNMP area. 4. Click Remove. 5. Click Apply. To add or remove a trap target list using the CLI, enter: REMOVE SNMP TRAPRECEIVER The must be in the form where ### ranges from 0 to 255. HP ProLiant BL e-Class Integrated Administrator User Guide 5-29 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 143
- Identifying the enclosure using the Unit Identification LED - Generating an enclosure summary - Identifying problem components • Managing users - Modifying a user's rights to server blade bays - Disabling and deleting user accounts HP ProLiant BL e-Class Integrated Administrator User Guide 6-1 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 144
the server blade is running the HP ProLiant Serial Console for Windows 2000 Server service. To allow Remote Console access to a server blade, install the HP ProLiant Serial Console for Windows 2000 Server service, located at www.compaq.com/support/files/server IMPORTANT: Enclosure administrators - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 145
new window that enables you to connect to the server blade terminal interface. To access the remote console using the CLI, enter: CONNECT BAY IMPORTANT: A server blade can only support one remote console session at a time. HP ProLiant BL e-Class Integrated Administrator User Guide 6-3 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 146
, select Reboot at the bottom of the screen. c. Click Apply and return to the remote console session. 8. If the server blade is running the Linux operating system: a. Press the Enter key to get a prompt. b. Reboot the server blade. 6-4 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 147
: CONNECT BAY 3. If the server blade is running the Linux operating system reboot the server blade: a. Press the Enter key to get a prompt. b. Enter your user name and password. c. Enter: REBOOT BAY RBSU HP ProLiant BL e-Class Integrated Administrator User Guide 6-5 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 148
IMPORTANT: This task can only be performed for a given server blade bay by enclosure administrators, group administrators, and group members with access rights to the server blade bay. To access the console log for a server blade using the Web-based user interface: 1. Click the Bays tab. 2. Click - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 149
off the server blade using the Web-based user interface: 1. Click the Bays tab. 2. Click Bay List in the left panel. 3. Click the server blade whose power state you wish to modify. 4. Click Virtual Buttons at the bottom of the screen. HP ProLiant BL e-Class Integrated Administrator User Guide 6-7 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 150
blade using the CLI, enter: REBOOT BAY } {FORCE} {[PXE | HDD | RBSU]} NOTE: This command sends a request to the server blade in a given bay to perform a graceful shutdown and then reboots the server blade. 6-8 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 151
a server blade using the Web-based user interface: 1. Click the Bays tab. 2. Click Bay List in the left panel. 3. Click the server blade whose Unit Identification LED you wish to toggle. 4. Click Virtual Buttons at the bottom of the screen. HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 152
6-3: Accessing the Unit Identification LED button for a server blade (shown in the off state) To change the state of the Unit Identification LED for a server blade using the CLI, enter: SET BAY UID } [ON | OFF] 6-10 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 153
events in the enclosure by accessing the System Log. In contrast to the Event List, no other users can access the System Log. For more information on how the Event List differs from the System Log, see the "Identifying Problem Components" section in this chapter. HP ProLiant BL e-Class Integrated - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 154
click Clear Log. The Integrated Administrator prompts you to confirm this decision. To view the System Log of the enclosure using the CLI, enter: SHOW SYSLOG ENCLOSURE IMPORTANT: Only enclosure administrators can execute this command. 6-12 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 155
in the left panel. 3. Click Toggle ON or Toggle OFF depending on the current state of the Unit Identification LED for the enclosure. Figure 6-5: Accessing the Unit Identification LED button for the enclosure (shown in the on state) HP ProLiant BL e-Class Integrated Administrator User Guide 6-13 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 156
interface, click Printable View in the top panel. The Web-based user interface opens a new window that shows all enclosure information, which you can copy and paste into a printable file. Figure 6-6: Generating an enclosure summary 6-14 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 157
the heading "power status." SHOW ENCLOSURE TEMP IMPORTANT: This command displays the location, status (OK, warm, degraded, or failed), and temperature (degrees Fahrenheit and Celsius) for all the temperature sensors of the enclosure. HP ProLiant BL e-Class Integrated Administrator User Guide 6-15 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 158
Problem Components The Integrated Administrator alerts you to problem conditions or failed components in the enclosure, such as: • A fan • A power supply • A server blade • Over-temperature conditions If the enclosure a fan failure 6-16 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 159
user logged into the Integrated Administrator. The system log displays every message generated by the enclosure diagnostics. • Clicking on the Caution or Critical icon along the top of the the degraded conditions are corrected or not. HP ProLiant BL e-Class Integrated Administrator User Guide 6-17 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 160
2. Click on System Log in the left panel. Figure 6-8: Viewing the enclosure system log during a fan failure (Fan 1 removed) 3. Go to the appropriate area in the Integrated Administrator for the spare number of the degraded component. 6-18 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 161
View Event Details along the bottom of the screen. This action opens the page in the Integrated Administrator that displays information about the degraded component. HP ProLiant BL e-Class Integrated Administrator User Guide 6-19 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 162
option for this command ensures that all users are able to see failures as they occur while they are logged into the Integrated Administrator. 6-20 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 163
the heading "power status." SHOW ENCLOSURE TEMP IMPORTANT: This command displays the location, status (OK, warm, degraded, or failed), and temperature (degrees Fahrenheit or Celsius) for all the temperature sensors of the enclosure. HP ProLiant BL e-Class Integrated Administrator User Guide 6-21 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 164
membership Creating a New Group with the Updated Access Rights To create a new group with the updated server blade access profile you wish to assign your user, see the "Adding a Group" section in Chapter 5, "Setting Up the System." 6-22 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 165
to server blade bays using the Web-based user interface: 1. Click the Administration tab. 2. Click Group List in the left panel. Figure 6-11: Choosing a group from the group list 3. Click on the group whose rights you wish to modify. HP ProLiant BL e-Class Integrated Administrator User Guide 6-23 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 166
checkboxes for the available server blade bays that reflects the updated rights you wish to give the group. IMPORTANT: Grayed-out checkboxes are unavailable because they are already assigned to another group. 6. Click Apply. 6-24 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 167
access rights to server blade bays for any group, enter: UNASSIGN BAY [ALL | }] Disabling and Deleting User Accounts IMPORTANT: Only enclosure administrators may execute you wish to disable from the user list. HP ProLiant BL e-Class Integrated Administrator User Guide 6-25 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 168
. Deleting a User's Account To delete a user account using the Web-based user interface: 1. Click the Administration tab. 2. Click User List in the left panel. 6-26 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 169
removed. Deleting Group Accounts To delete a group account using the Web-based user interface: 1. Click the Administration tab. 2. Click Group List in the left panel. HP ProLiant BL e-Class Integrated Administrator User Guide 6-27 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 170
delete a group account using the CLI, enter: REMOVE GROUP [ALL | ] IMPORTANT: If ALL is specified, the command deletes all the group accounts. 6-28 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 171
Server Blade Boot Order • Powering off the enclosure enclosure administrators may perform the tasks in this chapter. For more information on who may perform each task, see the "User Permissions" section in Chapter 5, "Setting Up the System." HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 172
, passwords, and network settings) for the other enclosures. IMPORTANT: Step 4 only applies if the other enclosures have been configured previously. NOTE: For security reasons, passwords are never replicated in the configuration file. 7-2 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 173
each of the other enclosures: a. Login as Administrator on an enclosure to which you intend as protocol://host/path/file. If your ftp server does not support anonymous connections, specify a username and password by Interface." HP ProLiant BL e-Class Integrated Administrator User Guide 7-3 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 174
SSL certificate. This certificate is signed with the current name of the enclosure and will be valid for 10 years. Users who do not have Supported protocols are http, ftp, and tftp. The URL should be formatted: protocol://host/path/file 7-4 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 175
Functions If your ftp server does not support anonymous connections, you can Integrated Administrator that are authorized to log in using an enclosure administrator account. To view the fingerprint of the Integrated to log in. HP ProLiant BL e-Class Integrated Administrator User Guide 7-5 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 176
ENCLOSURE STATUS; SHOW STATUS BAY ALL" By having an authorized key file installed on the Integrated Administrator, the user can combine these without having to enter a password between each command sent to the Integrated Administrator. 7-6 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 177
clear changes to the specified server boot order that were made with the SET BAY BOOT command. It only affects pending changes so if the server blade has been rebooted since the SET BAY BOOT command, this command will have no effect. HP ProLiant BL e-Class Integrated Administrator User Guide 7-7 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 178
are pending for a specific blade, use the SHOW BAY INFO command. The "Pending Boot Order:" status line will show any pending changes to the boot order, either one-time or permanent. Powering Off the Enclosure CAUTION: Powering off the enclosure removes all power from the server blades and ends all - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 179
off. CAUTION: Without the server blade health driver or an ACPI-compliant operating system, the Integrated Administrator cannot gracefully shutdown a server blade. This condition may result in the permanent loss of critical data. HP ProLiant BL e-Class Integrated Administrator User Guide 7-9 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 180
radio buttons in the Protocols area. 4. Click Apply. To modify the supported communications protocols of the enclosure using the CLI, choose from among the following commands: • To disable http/https communication, enter: DISABLE WEB 7-10 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 181
(10/100 Ethernet) connector located on the rear panel of the enclosure. See Table 4-5, "Enclosure Management Commands," for detailed information on the following command used to perform pathname of the flash image to download. HP ProLiant BL e-Class Integrated Administrator User Guide 7-11 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 182
to the Integrated Administrator (serial) console connector using the null-modem serial cable (provided with the enclosure). Figure 7-3: Installing a local client device to the Integrated Administrator (serial) console connector 7-12 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 183
Launching Flash Disaster Recovery Flash Recovery mode requires the following items: • DHCP server • TFTP server • A connection to the Integrated Administrator serial console • Integrated Administrator ROM image file on the TFTP server HP ProLiant BL e-Class Integrated Administrator User Guide 7-13 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 184
Administrator can be any valid image that supports the "update image" facility in the Flash Recovery mode can also be manually initiated. IMPORTANT: No timeout exists image is corrupted by some unforeseen problem, such as a power/catastrophic HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 185
cable (provided with the enclosure). See the "Requirements for Local Client Devices" section in Chapter 2, "Getting Started." Figure 7-5: Installing a local client device to the Integrated Administrator (serial) console connector HP ProLiant BL e-Class Integrated Administrator User Guide 7-15 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 186
Reset button (2) simultaneously on the rear panel of the server to place the enclosure in Lost Password/Flash Disaster Recovery mode. 1 2 Figure 7-6: Enclosure Unit Identification button and the Integrated Administrator Reset button 7-16 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 187
mode, prints a message, and resets the enclosure. Upon entering Flash Disaster Recovery mode, the Integrated - IP address of the TFTP server - Filename of the ROM on the TFTP server The Integrated Administrator then downloads and HP ProLiant BL e-Class Integrated Administrator User Guide 7-17 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 188
for executing this command for the DHCP environment, but specifying the IP address and netmask are required for executing this command for the static environment. HP ProLiant BL e-Class Integrated Administrator User Guide A-1 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 189
messages specific to the major components of the Integrated Administrator. These warning messages advise you that you have implemented a configuration change or prompt you to confirm whether you wish to proceed with your requested action. HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 190
the SNMP protocol disabled Attempting to set a blank Read Community string Attempting to power off the enclosure Attempting to restart the Integrated Administrator Attempting to clear the system log Attempting to enable IP Security B-2 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 191
server blade immediately? This process may result in the loss of any unsaved data on the blade. Cause The server blade that is being viewed has been removed from the enclosure. The current server blade user Attempting to delete a group HP ProLiant BL e-Class Integrated Administrator User Guide B-3 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 192
clear the system log Valid Input N/A N/A N/A Server Blade Bay Error Messages Table B-5: Server Blade Bay Error Messages Error Message You no longer have permissions to view this bay. Cause User permission change Valid Input N/A B-4 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 193
printable characters 3-8 characters including all printable characters 3-8 characters including all printable characters 3-8 characters including all printable characters 3-8 characters including all printable characters N/A continued HP ProLiant BL e-Class Integrated Administrator User Guide B-5 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 194
should be in format where ### is between 0 and 255. is not a valid NTP server. Attempting to create a 21st group Attempting to create a user with a blank password Attempting -9999 where ### is between 0 and 255 N/A continued B-6 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 195
never set. Please set the primary NTP server first. Attempting to set the secondary NTP server without first setting the primary NTP server. Invalid IP address supplied. IP address should " and containing a maximum of 64 characters. HP ProLiant BL e-Class Integrated Administrator User Guide B-7 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 196
switches specific to the server blades and enclosure, refer to the HP ProLiant BL e-Class System Setup and Installation Guide. For information about general troubleshooting techniques, diagnostic tools, error messages, and preventative maintenance, refer to the HP Servers Troubleshooting Guide, also - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 197
95 and Windows 98 users and is available in Service Pack 2 for Windows 2000 users. For the most up-to-date information on supported Web browsers, please view the customer advisories located at www.compaq.com/support/servers The server blade configuration information is exchanged with the Integrated - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 198
may highlight the event and click on View/Modify to see the present event status. The user can also view the System Log of the enclosure. HP ProLiant BL e-Class Integrated Administrator User Guide C-3 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 199
event occurs, a reasonable guarantee that operability can persist no longer exists. Critical-An event that prevents the continued operation of the enclosure When a Critical event occurs, the inoperability of the enclosure is imminent. HP ProLiant BL e-Class Integrated Administrator User Guide D-1 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 200
power supplies are no longer redundant. Power supply # is in a degraded state. The enclosure temperature has exceeded the caution threshold. Blade # is in a degraded state. The temperature on blade # has exceeded the caution threshold. D-2 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 201
E Factory Default Settings This appendix provides the factory default settings for the following components of the ProLiant BL e-Class Integrated Administrator: • Enclosure • Users • Groups • Network • Protocol HP ProLiant BL e-Class Integrated Administrator User Guide E-1 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 202
the Integrated Administrator for fields related to the server blade enclosure. Table E-1: Default Enclosure Values for the Integrated Administrator Field Name used when accessing the optionally installed interconnect switch console. E-2 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 203
HTTP SSH TELNET SNMP SNMP location SNMP contact READ community WRITE community NTP Default Value On On On On Blank Blank Public Blank Disabled continued HP ProLiant BL e-Class Integrated Administrator User Guide E-3 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 204
Factory Default Settings Table E-3: Default Protocol Values of Integrated Administrator continued Field Default Value IP Security Disabled AlertMail Disabled E-4 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 205
a comprehensive list of time zones supported by the ProLiant BL e-Class Integrated Administrator. These time zones are organized into the following categories: • Universal • Africa • Asia • Europe • Oceania • Polar • The Americas HP ProLiant BL e-Class Integrated Administrator User Guide F-1 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 206
GMT time zones, the "Etc:" string must precede them. Table F-1: Universal Time Zone Settings Supported by the Integrated Administrator CET CST6CDT EET EST EST5EDT Etc:GMT Etc:GMT0 Etc:GMT+0 Etc PST8PDT UCT Universal UTC WET W-SU Zulu F-2 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 207
provides the African time zone settings supported by the Integrated Administrator. Table F-2: African Time Zone Settings Supported by the Integrated Administrator Africa:Abidjan Africa:Tripoli Africa:Tunis Africa:Windhoek Egypt Libya HP ProLiant BL e-Class Integrated Administrator User Guide F-3 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 208
F-3 provides the Asian time zone settings supported by the Integrated Administrator. Table F-3: Asian Time Zone Settings Supported by the Integrated Administrator Asia:Aden Asia: Asia:Tashkent Asia:Tbilisi Asia:Tehran continued F-4 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 209
Time Zone Settings Table F-3: Asian Time Zone Settings Supported by the Integrated Administrator continued Asia:Tel_Aviv Asia:Vladivostok Mideast: Asia:Ulan_Bator Israel Turkey Asia:Urumqi Japan Asia:Vientiane Mideast:Riyadh87 HP ProLiant BL e-Class Integrated Administrator User Guide F-5 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 210
provides the European time zone settings supported by the Integrated Administrator. Table F-4: European Time Zone Settings Supported by the Integrated Administrator Eire Europe :Zaporozhye Europe:Zurich GB GB-Eire Poland Portugal F-6 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 211
the Oceanic time zone settings supported by the Integrated Administrator. Table F-5: Oceanic Time Zone Settings Supported by the Integrated Administrator Atlantic :Kiritimati Pacific:Kosrae Pacific:Kwajalein Pacific:Majuro continued HP ProLiant BL e-Class Integrated Administrator User Guide F-7 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 212
Time Zone Settings Table F-5: Oceanic Time Zone Settings Supported by the Integrated Administrator continued Pacific:Marquesas Pacific:Pitcairn Pacific: Pacific:Pago_Pago Pacific:Tahiti US:Samoa Pacific:Palau Pacific:Tarawa F-8 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 213
Supported by the Integrated Administrator Antarctica:Casey Antarctica:Davis Antarctica:DumontDUrville Antarctica:Mawson Antarctica:McMurdo Antarctica:Palmer Antarctica:South_Pole Antarctica:Syowa Antarctica:Vostok Arctic:Longyearbyen HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 214
the American time zone settings supported by the Integrated Administrator. Table F-7: American Time Zone Settings Supported by the Integrated Administrator America: :Kentucky:Monticello America:Knox_IN America:La_Paz continued F-10 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 215
Time Zone Settings Table F-7: American Time Zone Settings Supported by the Integrated Administrator continued America:Chicago America:Guadeloupe Thule US:Aleutian America:Noronha America:Thunder_Bay US:Arizona continued HP ProLiant BL e-Class Integrated Administrator User Guide F-11 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 216
Time Zone Settings Table F-7: American Time Zone Settings Supported by the Integrated Administrator continued America:Panama America:Tijuana US: US:Pacific America:Porto_Velho America:Yellowknife America:Puerto_Rico Brazil:Acre F-12 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 217
components. In compliance with Open Source licensing, HP has made the source code of all Open Source components used available at: opensource.hp.com To locate the Integrated Administrator project, consult the list of all projects. HP ProLiant BL e-Class Integrated Administrator User Guide G-1 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 218
remotely 3-2, 4-2 server blade RBSU 6-4 ADD 5-12 group 5-10 trap targets 5-28 user 5-14 administering server address 5-22 adding e-mail address, command line 5-22 disable 5-22 e-mail header 5-23 e-mail, adding address 5-22 enable 5-22 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 219
Server Recovery-2 1-6 automatic time configuration disable 5-25 disable secondary NTP server 5-25 enable 5-25 NTP poll interval 5-25 primary NTP server, set 5-25 secondary NTP server command 4-27 CLEAR SYSLOG ENCLOSURE command 4-16 Index-2 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 220
Server Blade Boot Order 7-7 configuring, SNMP support 5-26 CONNECT CONNECT BAY command 4-20 CONNECT SWITCH [A | B] command 4-4 connectors console (serial) 2-3 enclosure 1-2 ENABLE ALERTMAIL command 4-35 ENABLE SECURESH command 4-13 HP ProLiant BL e-Class Integrated Administrator User Guide Index-3 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 221
128-bit 1-3 entering a community string 5-26 error messages B-4 administration B-5 enclosure B-4 server blade bay B-4 European time zone F-6 event details D-1 Event List screen See icons D-1 symbols 3-4 EXIT command 4-3 Index-4 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 222
7 compatibility 1-4 server blade configuration 1-6 Integrated Administrator accessing locally 4-2 accessing remotely 3-2, 4-2 configuration 2-5 default enclosure values E-2 deployment, beginning 2-4 deployment, completing 2-11 HP ProLiant BL e-Class Integrated Administrator User Guide Index-5 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 223
4-2 summary home page 2-10 troubleshooting C-2 upgrading firmware 7-11 Integrated enclosure 6-11 server blade bays 6-2 users 6-22 messages bay event 4-26 enclosure event 4-25 user event 4-25 modifying asset tag number 5-7 Index-6 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 224
feature 1-3 powering off enclosure 7-8 server blade 6-7 POWEROFF POWEROFF BAY command 4-21 POWEROFF ENCLOSURE command 4-16 POWERON POWERON BAY command 4-33 POWERON BAY command 4-21 primary NTP server set 5-25 ProLiant Essentials Rapid Deployment Pack server blade configuration 1-6 protocol, factory - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 225
removing trap targets 5-29 replicating the Integrated Administrator configuration 7-2 reset and failure sequence replay 1-2 reset sequences, playback 1-2 resetting server, power cycle feature 1-3 RESTART command 4-16 reviewing enclosure activity 6-11 server blade activity 6-6 ROM-Based Setup Utility - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 226
4-6, 4-30 SHOW SNMP command 4-15 SHOW SYSLOG BAY command 4-24, 4-35 SHOW SYSLOG ENCLOSURE command 4-19 SHOW USER command 4-11 SHOW CONFIG command 4-17 SHOW EXPERT {MODE} command 4-15 SNMP Configuration screen See also Enclosure tab HP ProLiant BL e-Class Integrated Administrator User Guide Index-9 - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 227
21. See also Enclosure tab Clear button 3-21 Refresh button 3-21 T technical support xii telephone numbers xii Universal F-2 time, modifying 5-8 trap targets adding 5-28 removing 5-29 troubleshooting C-1 U UNASSIGN UNASSIGN BAY command 4-24 HP ProLiant BL e-Class Integrated Administrator User Guide - Compaq BL10e | HP ProLiant BL e-Class Integrated Administrator User Guide - Page 228
Utility 1-6 Enclosure Self Recovery-2 1-6 Insight Manager 7 1-6 ROM-Based Setup Utility 1-5 Console 1-3 W warning messages B-1 administration B-3 enclosure B-2 server blade bay B-3 WEB DISABLE command 4-12 ENABLE websites HP xiii HP ProLiant BL e-Class Integrated Administrator User Guide Index-11
HP ProLiant BL e-Class
Integrated Administrator
User Guide
May 2003 (Fourth Edition)
Part Number 249070-004