Compaq BL10e HP ProLiant BL e-Class Integrated Administrator User Guide - Page 119
Apply, Setting the enclosure name and rack name
UPC - 613326445501
View all Compaq BL10e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Setting Up the System Figure 5-1: Setting the enclosure name and rack name 7. Click Apply. To modify the enclosure name or rack name using the CLI, enter the following commands sequentially: SET ENCLOSURE NAME IMPORTANT: The must be 1-32 characters long and includes all alphanumeric, the dash, and the underscore characters. The default enclosure name is IA-XXXXXXXXXXXX where XXXXXXXXXXXX is replaced with the actual MAC address. SET RACK NAME IMPORTANT: The must be a maximum of 32 characters long and includes all alphanumeric, dash, and underscore characters. The default rack name is "UnnamedRack." 5-6 HP ProLiant BL e-Class Integrated Administrator User Guide
Setting Up the System
Figure 5-1:
Setting the enclosure name and rack name
7.
Click
Apply
.
To modify the enclosure name or rack name using the CLI, enter the following
commands sequentially:
SET ENCLOSURE NAME <enclosure name>
IMPORTANT:
The <enclosure name> must be 1-32 characters long and includes all
alphanumeric, the dash, and the underscore characters.
The default enclosure name is IA-XXXXXXXXXXXX where XXXXXXXXXXXX is replaced with
the actual MAC address
.
SET RACK NAME <rack name>
IMPORTANT:
The <rack name> must be a maximum of 32 characters long and includes all
alphanumeric, dash, and underscore characters. The default rack name is “UnnamedRack.”
5-6
HP ProLiant BL e-Class Integrated Administrator User Guide