Compaq BL10e HP ProLiant BL e-Class Integrated Administrator User Guide - Page 26
document, see Appendix A, Command Line Conventions.
UPC - 613326445501
View all Compaq BL10e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Getting Started b. Open a terminal emulation session with the following settings: 9600 bps, 8 data bits, no parity, and 1 stop bit. c. Log into the Integrated Administrator using the password on the settings tag attached to the interconnect tray. 2. Establish the Integrated Administrator IP address. For a detailed explanation of the command line conventions used in this document, see Appendix A, "Command Line Conventions." - If a DHCP server is attached to the network, determine the Integrated Administrator IP address. Enter the following command at the command line interface: SHOW NETWORK - If a DHCP server is not attached to the network, enter the following commands sequentially to assign a static IP address to the Integrated Administrator: SET IPCONFIG STATIC SET GATEWAY SET DNS {} You can now access the Integrated Administrator using a web browser, Secure Shell, Telnet, or SNMP. 2-6 HP ProLiant BL e-Class Integrated Administrator User Guide