Compaq BL10e HP ProLiant BL e-Class System Maintenance and Service Guide - Page 27
Removing a Server Blade, Removing the server blade from the enclosure
UPC - 613326445501
View all Compaq BL10e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Removal and Replacement Procedures Removing a Server Blade CAUTION: Integrated Administrator security settings are assigned to server blade bays, not to server blades. If server blades change locations within the enclosure, Integrated Administrator settings must also be adjusted to ensure accurate security. Refer to the HP ProLiant BL e-Class Integrated Administrator User Guide for more information on security settings. To remove a server blade from the enclosure: 1. Power down the server blade. See the "Powering Down a Server Blade" section in this chapter. 2. Press the release latch (1). 3. Pull down the ejector lever (2). 4. Remove the server blade from the enclosure (3). Figure 2-7: Removing the server blade from the enclosure Reverse steps 1 through 4 to replace a server blade. IMPORTANT: The server serial number must be re-entered through RBSU after replacing the server blade. Refer to the "Re-entering the Server Serial Number" section. 2-12 HP ProLiant BL e-Class System Maintenance and Service Guide HP CONFIDENTIAL Codename: MacDuff Part Number: 249066-005 Last Saved On: 7/11/03 7:27 AM