Compaq Evo D300s Evo Desktop Family, Small Form Factor Models, Intel Pentium 4 - Page 45
Type 1, Removing a Coin Cell Battery Type 1
View all Compaq Evo D300s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Battery Replacement Ä CAUTION: Static electricity can damage the electronic components of the computer or optional equipment. Before beginning these procedures, ensure that you are discharged of static electricity by briefly touching a grounded metal object. 1. If you have locked the Smart Cover Lock, use Computer Setup to unlock the lock and disable the Smart Cover Sensor. 2. Shut down the operating system properly, turn off the computer and any external devices, disconnect the power cord from the electrical outlet, and remove the computer cover or access panel. ✎ It may be necessary to remove an expansion card to gain access to the battery. 3. Locate the battery and battery holder on the system board. 4. Depending on the type of battery holder on your system board, complete the following instructions to replace the battery. Type 1 a. Lift the battery out of its holder. Removing a Coin Cell Battery (Type 1) C-2 Hardware Reference Guide