Compaq Evo n1020v Maintenance and Service Guide - Page 135
Removing the Processor, processor socket.
View all Compaq Evo n1020v manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
Removal and Replacement Procedures 2. Slide the left end of the processor release bar 1 forward until it clears the clip on the processor bracket (Figure 5-22). 3. Swing the processor release bar up and to the right 2 until it rests in an upright position. 4. Lift the processor straight up 3 and remove it from the processor socket. ✎ When installing the processor, make sure the gold triangle 4 is in the lower right corner. Figure 5-22. Removing the Processor Reverse the preceding procedures to install the processor. Maintenance and Service Guide 5-29
Removal and Replacement Procedures
Maintenance and Service Guide
5–29
2.
Slide the left end of the processor release bar
1
forward until
it clears the clip on the processor bracket (Figure 5-22).
3. Swing the processor release bar up and to the right
2
until it
rests in an upright position.
4. Lift the processor straight up
3
and remove it from the
processor socket.
✎
When installing the processor, make sure the gold triangle
4
is in
the lower right corner.
Figure 5-22. Removing the Processor
Reverse the preceding procedures to install the processor.