Compaq Presario 1100 Compaq Evo Notebook N1010v Series and Compaq Presario 110 - Page 37
Replacing the Hard Disk Drive - hard drive
View all Compaq Presario 1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Add-On Devices Replacing the Hard Disk Drive Replacing the Hard Disk Drive To replace the hard disk drive You'll need a small Phillips screwdriver for this procedure. 1. Unplug the AC adapter if you're using one, and remove the battery. 2. Turn the unit bottom side up. 3. Use a pointed tool to remove the plugs from the two screw holes, and then remove the two screws. 4. Gently pull the hard drive out of the computer. Important 5. Gently slide the new drive into the hard drive compartment. Press firmly to make sure the connector seats properly. 6. Reinstall the hard drive screws and plugs. If you are installing a new hard disk drive, you should create a Utility partition on the drive before loading any software. See "To recover the factory installation of your hard disk" on page 47. To install the holder on a new hard disk drive or prepare a new hard disk for use, see "Replacing the Hard Disk Drive" in the Reference Guide on the Documentation Library CD included with your computer. Startup Guide 37