Compaq Presario 6400 Getting Started - Compaq Presario 6000 and 8000 Series Co - Page 99
See Upgrading the Computer - memory upgrade
View all Compaq Presario 6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Finding Help & Support Power (Continued) Symptom Problem Solution Computer will not turn on and/or start. (Continued) Wrong memory modules were used in the upgrade, or memory modules were installed in the wrong location. Reinstall the old memory to return your computer to its original state. Refer to "Upgrading or Replacing Memory" on page 8-17 for instructions. Hard drive is damaged. Refer to the Warranty and Support Guide for details. Drive power, data, or power supply cables may not be properly connected. Reseat drive power, data, and power supply cables. See Chapter 8, "Upgrading the Computer" for instructions. Computer appears locked Software control of the up and won't turn off when power switch is not the power button is pressed. functional. Press and hold the Power button for at least 4 seconds until the computer turns off. Getting Started 7-29