Compaq Presario CQ71-200 Compaq Presario CQ71 Notebook PC and HP G71 Notebook - Page 62

Memory module, swing it up and to the right, and remove the cover. The hard drive

Get Compaq Presario CQ71-200 - Notebook PC PDF manuals and user guides View all Compaq Presario CQ71-200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 62 highlights

Memory module Description 2048-MB (800-MHz, PC2-6400, DDR2) 1024-MB (800-MHz, PC2-6400, DDR2) Spare part number 513766-001 513766-001 Before removing the memory module, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 47). Remove the hard drive cover: 1. Loosen the 4 Phillips PM2.5×6.0 captive screws (1) that secure the hard drive cover to the computer. 2. Lift the left side of the cover (2), swing it up and to the right, and remove the cover. The hard drive cover is included in the Plastics Kit, spare part number 531859-001. 3. Spread the retaining tabs (1) on each side of the memory module slot to release the memory module. (The edge of the module opposite the slot rises away from the computer.) 54 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
Memory module
Description
Spare part number
2048-MB (800-MHz, PC2-6400, DDR2)
513766-001
1024-MB (800-MHz, PC2-6400, DDR2)
513766-001
Before removing the memory module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery
on page
47
).
Remove the hard drive cover:
1.
Loosen the 4 Phillips PM2.5×6.0 captive screws
(1)
that secure the hard drive cover to the
computer.
2.
Lift the left side of the cover
(2)
, swing it up and to the right, and remove the cover. The hard drive
cover is included in the Plastics Kit, spare part number 531859-001.
3.
Spread the retaining tabs
(1)
on each side of the memory module slot to release the memory
module. (The edge of the module opposite the slot rises away from the computer.)
54
Chapter 4
Removal and replacement procedures