Compaq d538 HP Compaq Business Desktops d530 Convertible Minitower - Hardware - Page 41
lock and enable the Smart Cover Sensor., Recon the computer, if necessary. Refer to
View all Compaq d538 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Hardware Upgrades 6. Connect the opposite end of the data cable to the appropriate system board connector. If your system has only one SATA hard drive, you must connect the hard drive to the connector labeled SATA 0 first to avoid any hard drive performance problems. 1 SATA hard drive connector 2 PATA hard drive connector Hard Drive Connector Locations 7. Replace the computer access panel. 8. If you normally lock the Smart Cover Lock, use Computer Setup to relock the lock and enable the Smart Cover Sensor. 9. Reconfigure the computer, if necessary. Refer to the Computer Setup (F10) Utility Guide on the Documentation Library CD for instructions about using Computer Setup. Hardware Reference Guide 2-25
Hardware Upgrades
6.
Connect the opposite end of the data cable to the appropriate system board
connector.
If your system has only one SATA hard drive, you must connect the hard drive to the
connector labeled SATA 0 first to avoid any hard drive performance problems.
1
SATA hard drive connector
2
PATA hard drive connector
Hard Drive Connector Locations
7.
Replace the computer access panel.
8.
If you normally lock the Smart Cover Lock, use Computer Setup to relock the
lock and enable the Smart Cover Sensor.
9.
Reconfigure the computer, if necessary. Refer to the
Computer Setup (F10)
Utility
Guide
on the
Documentation Library
CD for instructions about using
Computer Setup.
Hardware Reference Guide
2-25