Compaq d538 Troubleshooting Guide - Page 70
Diagnostic Front Panel LEDs and Audible Codes, Activity, Beeps, Possible Cause, Recommended Action
View all Compaq d538 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
POST Error Messages Diagnostic Front Panel LEDs and Audible Codes (Continued) Activity Beeps Possible Cause Recommended Action Red Power LED flashes two times, once every second, followed by a two second pause. None Processor thermal protection activated: A fan may be blocked or not turning. OR The heatsink/fan assembly is not properly attached to the processor. 1. Ensure that the computer air vents are not blocked and the processor cooling fan is running. 2. Open hood, press power button, and see if the processor fan spins. If the processor fan is not spinning, make sure the fan's cable is plugged onto the system board header. Ensure the fan is fully/properly seated or installed. 3. If fan is plugged in and seated properly, but is not spinning, then replace processor fan. 4. Reseat processor heatsink and verify that the fan assembly is properly attached. 5. Contact an authorized reseller or service provider. Red Power LED stays on. OR Red Power LED flashes three times, once every second, followed by a two second pause. None Processor not installed (not an indicator of bad processor). 1. Check to see that the processor is present. 2. Reseat the processor. Troubleshooting Guide www.hp.com A-13