Craftsman 10137 Operation Manual
Craftsman 10137 - 1/2 in. Corded Hammer Drill Manual
 |
UPC - 033287137145
View all Craftsman 10137 manuals
Add to My Manuals
Save this manual to your list of manuals |
Craftsman 10137 manual content summary:
- Craftsman 10137 | Operation Manual - Page 1
PERATOR'S MANUAL T ® 1/2 in. HAMMER DRILL VARIABLE SPEED/REVERSIBLE DOUBLE iNSULATED Model No. 315.101370 A WARNING: To reduce the risk of injury, the user must read and understand the operator's manual before using this product. Customer Help Line: 1-800-932-3188 Sears, Roebuck and Co., 3333 - Craftsman 10137 | Operation Manual - Page 2
[] Accessories ... 15 [] Exploded View and Parts List ... 16 [] Parts Ordering/Service ... Back Page ONE YEAR FULL WARRANTY ON CRAFTSMAN TOOL If this Craftsman tool fails to give complete satisfaction within one year from date of purchase, RETURN IT TO THE NEAREST SEARS STORE IN THE UNITED STATES - Craftsman 10137 | Operation Manual - Page 3
wrench or a key left attached to a rotating part of the power tool may result in personal . [] Do not use on a ladder or unstable support. Stable footing on a solid surface enables better control tool bits etc., in accordance with these instructions and in the manner intended for the particular - Craftsman 10137 | Operation Manual - Page 4
manual. [] When servicing a power tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unau- thorized parts or failure to follow Maintenance instructions may create a risk of shock or injury. [] Wear ear protectors with impact drills - Craftsman 10137 | Operation Manual - Page 5
insulated construction Revolutions, strokes, surface speed, orbits etc., per minute Do not expose to rain or use in damp locations. 0 ,A @ @ @ ® Read The Operator's Manual Eye Protection Safety Alert No Hands Symbol No Hands Symbol No Hands Symbol No Hands Symbol Hot Surface To reduce the risk of - Craftsman 10137 | Operation Manual - Page 6
servicing, use only identical replacement parts. A WARNING: To avoid serious personal injury, do not attempt to use this product until you read thoroughly and understand completely the operator's manual. Save this operator's manual and review frequently for continuing safe operation and instructing - Craftsman 10137 | Operation Manual - Page 7
of the system and should be performed only by a qualified service technician. For service, we suggest you return the tool to your nearest authorized service center for repair. Always use original factory replacement parts when servicing. ELECTRICAL CONNECTION This tool has a precision-built electric - Craftsman 10137 | Operation Manual - Page 8
000/rain. Blows Per Minute (BPM 0-16,000/min. Input V, 60 Hz, AC only, 6Amps Net Weight 5.02 Ibs. AUXILIARY HANDLE DRILLING/HAMMER MODESELECTOR LEVELS DEPTH GAUGE ROD DEPTH GAUGE CLAMP KEYLESS SPINDLE LOCK CHUCK BUTTON VARIABLE SPEED SWITCH LOCK-ON BUTTON DIRECTIONOF ROTATION (FORWARD - Craftsman 10137 | Operation Manual - Page 9
missing, please call 1-800-932-3188 for assistance. PACKING LiST Hammer Drill with Auxiliary Handle Assembly Depth Gauge Rod Carrying Case Operator's Manual A WARNING: If any parts are missing do not operate this tool until the missing parts are replaced. Failure to do so could result in possible - Craftsman 10137 | Operation Manual - Page 10
injury. APPLICATIONS You may use this tool for the purposes listed below: [] Hammer drilling in concrete, brick, or other masonry [] Drilling in wood [] Drilling in ceramics, plastics, fiberglass, and laminates [] Drilling in metals [] Mixing paint VARIABLE SPEED SWITCH See Figure 2, To turn the - Craftsman 10137 | Operation Manual - Page 11
bit into the chuck jaws at an angle then tighten, as shown in figure 4. This could cause the drill bit to be thrown from the drill, resulting in possible serious personal injury or damage to the chuck. [] Rotate the chuck counterclockwise to tighten the chuck jaws securely on the bit. NOTE: - Craftsman 10137 | Operation Manual - Page 12
of the motor housing to hammer mode or drilling mode. The hammer mode symbol is on the left and the drill bit symbol is on the right. _lb WARNING: The hammer drill has not been designed for reverse hammering. Use carbide-tipped bits and select hammer mode when drilling in hard materials such as - Craftsman 10137 | Operation Manual - Page 13
a vise or with clamps to keep it from turning as the drill bit rotates. [] Plug the hammer drill into power supply. Hold the drill firmly and place the bit at the point to be drilled. [] Depress the variable speed switch to start the drill. Do not lock the variable speed switch ON for applications - Craftsman 10137 | Operation Manual - Page 14
when drilling holes in brick, tile, concrete, etc. [] Slide adjustment button on hammer drill left for hammer mode. drilling at a very low speed to prevent the bit from slipping off the starting point. A WARNING" When servicing, use only identical Craftsman replacement parts. Use of any other parts - Craftsman 10137 | Operation Manual - Page 15
develop a wobble. Also, the chuck screw may become loose, causing the chuck jaws to bind and prevent them from closing. To tighten: [] Unplug the drill. [] Open the chuck jaws. [] Insert a hex key into the chuck and tighten chuck jaws securely. Tap the hex key sharply with a mallet in a clockwise - Craftsman 10137 | Operation Manual - Page 16
. CRAFTSMAN HAMMER DRILL - MODEL NUMBER 315.101370 7 14 13 19 I I 27 I I 11 SEENOTE 23 28 NOTE: The assembly shown represents an important part of the Double Insulated System. To avoid the possibility of alteration or damage to the System, service should be performed by your nearest Sears - Craftsman 10137 | Operation Manual - Page 17
_" CRAFTSMAN HAMMER DRILL - MODEL NUMBER 315.101370 '_ I Tnhuembmeor deinl anllucmobrreerspwoinlldbeencefoundregoanrdaingplayteouar ttHacAhMeMd ERto thDeRImLoLtoor r hwohuesningo. rdAelrwinagys rempaeinrtiopnartsth, e model |J SEE BACK PAGE FOR PARTS ORDERING INSTRUCTIONS Key Part No. Number 1 - Craftsman 10137 | Operation Manual - Page 18
it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself. For Sears professional installation of home Canada pour service en fran£ais: 1-800-LE-FOYER Mc (1-800-533-6937) www.sears.ca ® Registered Trademark / TMTrademark / su Service Mark of Sears, Roebuck and
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
 |
 |
PERATOR'S
MANUAL
T
®
1/2
in. HAMMER
DRILL
VARIABLE SPEED/REVERSIBLE
DOUBLE
iNSULATED
Model No.
315.101370
A
WARNING:
To reduce the risk of
injury,
the user must read and understand
the
operator's
manual before using this product.
Customer
Help
Line:
1-800-932-3188
Sears,
Roebuck
and Co.,
3333
Beverly
Rd.,
Hoffman
Estates,
IL 60179
USA
Visit the Craftsman
web page: www.sears.com/craftsman
983000-753
6-14-06
(REV:01)
Save
this
manual
for
future
reference