Craftsman 10137 Operation Manual - Page 9

KNOWYOUR HAMMER DRILL See Figure 1. Before attempting to use this product, familiarize yourself with all operating features and safety rules. AUXILIARY HANDLE Your drill is equipped with an auxiliary handle for ease of operation and to prevent loss of control. DiRECTiON OF ROTATION SELECTOR (FORWARD/REVERSE) Your drill has a direction of rotation (forward/reverse) selector located above the variable speed switch for changing the direction of bit rotation. HAMMER SPEED Your hammer drill has a hammer speed of 0-16,000 BPM (Blows Per Minute). Blows Per Minute is the number of impacts per minute that the tool delivers in hammer mode. KEYLESS CHUCK The keyless chuck allows you to hand-tighten or release the drill bit in the chuck jaws. LEVELS Levels are located on the top and end of the motor housing to help keep the drill bit level during use. LiVE TOOL iNDiCATOR The live tool indicator is located on the handle of the drill and indicates that the tool is connected to a power supply. LOCK=ON BUTTON The lock-on button is convenient for continuous drilling for extended periods of time. SPINDLE LOCK The spindle lock keeps the chuck from turning while installing and removing bits. VARIABLE SPEED SWITCH The variable speed switch delivers higher speed with increased pressure and lower speed with decreased pressu re. UNPACKING This product has been shipped completely assembled. [] Carefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included. [] Inspect the tool carefully to make sure no breakage or damage occurred during shipping. [] Do not discard the packing material until you have carefully inspected and satisfactorily operated the tool. [] If any parts are damaged or missing, please call 1-800-932-3188 for assistance. PACKING LiST Hammer Drill with Auxiliary Handle Assembly Depth Gauge Rod Carrying Case Operator's Manual A WARNING: If any parts are missing do not operate this tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury. A WARNING: Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. A WARNING: Do not connect to power supply until assembly is complete. Failure to comply could result in accidental starting and possible serious injury.