Craftsman 28922 Operation Manual - Page 7
Tools, Required, Remove, Tractor, Carton
View all Craftsman 28922 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Keys (2) Keys (1) Oil Drain Tube For Future Use Slope Sheet Your new tractor has been assembled unassembled for shipping purposes. all parts and hardware you assemble necessary to insure proper tightness. at the factory with the exception of those parts left To ensure safe and proper operation of your tractor must be tightened securely. Use the correct tools as TOOLS REQUIRED FOR ASSEMBLY CHECK BATTERY A socket wrench easier. Standard are listed below. (1) 3/4" wrench (1) 1/2" wrench (1) Tire pressure set will make assembly wrench sizes you need (1) Pliers (1) Utility knife gauge When right or left hand is mentioned in this manual, itmeans when you are in the operating position (seated behind the steering wheel). TO REMOVE CARTON TRACTOR FROM UNPACK CARTON 1. Remove all accessible loose parts and parts boxes from carton. 2. Cut along dashed lines on all four panels of carton. Remove end panels and lay side panels flat. 3. Check for any additional loose parts or cartons and remove. 1. Lift seat pan to raised position. NOTE: If this battery is put into service after month and year indicated on label (label located between terminals) charge battery for minimum of one hour at 6-10 amps. (See "BATTERY" in Maintenance section of this manual for charging instructions). Seat Label Terminal Terminal TO ADJUST SEAT Grasp adjustment handle (A) and pull up, slide seat to desired position and release adjustment handle. 7