Cub Cadet RZT L 42 H Operation Manual - Page 35
Problem, Cause, Remedy
View all Cub Cadet RZT L 42 H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Problem Engine overheats Cause 1. Engine oil level low. 2. Air flow restricted. Engine hesitates at high RPM Engine Idles rough 1. Spark plug(s) gap too close. 1. Spark plug(s) fouled, faulty or gap too wide. 2. Dirty air cleaner. Excessive vibration Uneven cut Mower will not mulch grass (If Equipped w/Mulching Kit) 1. Cutting blade loose or unbalanced. 2. Damaged or bent cutting blade. 1. Deck not leveled properly. 2. Dull blade. 3. Uneven tire pressure. 1. Engine speed too low. 2. Wet grass. 3. Excessively high grass. 4. Dull blade. Remedy 1. Fill crankcase with proper amount and weight of oil. 2. Clean grass clippings and debris from around the engine's cooling fins and blower housing. 1. Remove spark plug(s) and reset the gap. 1. Replace spark plug(s). Set plug gap. 2. Replace air cleaner element and/or clean pre-cleaner. 1. Tighten blade and spindle. 2. Replace blade. 1. Perform side-to-side deck adjustment. 2. Sharpen or replace blade. 3. Check tire pressure in all four tires. 1. Place throttle/choke control lever in FAST (rabbit) position. 2. Do not mulch when grass is wet. 3. Mow once at a high cutting height, then mow again at desired height or make a narrower cutting swath. 4. Sharpen or replace blade. Section 8 - Troubleshooting 35