Home » Cub Cadet Manuals » Lawn Mowers » Cub Cadet TANK SZ 60 » Manual Viewer

Cub Cadet TANK SZ 60 TANK SZ 48 Operator's Manual

Cub Cadet TANK SZ 60 Manual

View all Cub Cadet TANK SZ 60 manuals

Add to My Manuals
Save this manual to your list of manuals

Cub Cadet TANK SZ 60 manual content summary:

Cub Cadet TANK SZ 60 | TANK SZ 48 Operator's Manual - Page 1
• Maintenance • Service • Troubleshooting • Warranty Operator's Manual Tank SZ WARNING READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL BEFORE ATTEMPTING TO OPERATE THIS MACHINE. FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY. Printed In USA CUB CADET LLC
Cub Cadet TANK SZ 60 | TANK SZ 48 Operator's Manual - Page 2
found at www.opei.org or the engine manufacturer's web site. If you have any problems or questions concerning the machine, phone your local Cub Cadet dealer or contact us directly. Cub Cadet's Customer Support telephone numbers, website address and mailing address can be found on this page. We want
Cub Cadet TANK SZ 60 | TANK SZ 48 Operator's Manual - Page 3
instructions in this manual before attempting to operate this machine. Failure to comply with these instructions your nearest engine authorized service dealer or contact the service department, P.O. Box 361131 this manual. As with any type of power equipment, carelessness or error on the part of the
Cub Cadet TANK SZ 60 | TANK SZ 48 Operator's Manual - Page 4
injuries occurring to them, other people or property. General Operation 1. Read, understand, and follow all instructions on the machine and in the manual(s) before attempting to assemble and operate. Keep this manual in a safe place for future and regular reference by each operator and for ordering
Cub Cadet TANK SZ 60 | TANK SZ 48 Operator's Manual - Page 5
instructions provided with the approved accessory or attachment. 32. Data indicates that operators, age 60 manual use care and good judgement. Contact your customer service gauge included as part of this manual to measure slopes maintain traction, disengage the blades and proceed slowly and carefully
Cub Cadet TANK SZ 60 | TANK SZ 48 Operator's Manual - Page 6
operator's waist at all times, except when the instructions and safe operation practices in this manual and on ROPS are: the machine and should exposure (sunlight, rain, etc.). The ROPS and seat belt are integral parts of this machine and should not be tampered with, modified in any manner
Cub Cadet TANK SZ 60 | TANK SZ 48 Operator's Manual - Page 7
. h. Never over fill fuel tank. Fill tank to no more than ½ inch manual. "Use of parts which do not meet the original equipment specifications may lead to improper performance and compromise safety!" 8. Mower blades are sharp. Wrap the blade or wear gloves, and use extra caution when servicing
Cub Cadet TANK SZ 60 | TANK SZ 48 Operator's Manual - Page 8
(O.E.M.) parts only, listed in this manual. "Use of parts which the engine. 14. Maintain or replace safety and instruction labels, as necessary. 15. Observe proper disposal tanks for evaporative emission control. California models may also include a carbon canister. Please contact Customer Support
Cub Cadet TANK SZ 60 | TANK SZ 48 Operator's Manual - Page 9
to assemble and operate. Symbol Description READ THE OPERATOR'S MANUAL(S) Read, understand, and follow all instructions in the manual(s) before attempting to assemble and operate WARNING- ROTATING BLADES Do not put hands or feet near rotating parts or under the cutting deck. Contact with the
Cub Cadet TANK SZ 60 | TANK SZ 48 Operator's Manual - Page 10
Slope Gauge (OK) Figure 1 20° Slope (TOO STEEP) Figure 2 20° dashed line USE THIS SLOPE GAUGE TO DETERMINE IF A SLOPE IS TOO STEEP FOR SAFE OPERATION! To check the slope, proceed as follows: 1. Remove this page and fold along the dashed line. 2. Locate a vertical object on or behind the slope
Cub Cadet TANK SZ 60 | TANK SZ 48 Operator's Manual - Page 11
with the clevis pin attached to the machine. See Fig. 3-1. The two hydrostatic transmissions are equipped with a bypass valve that will allow you to manually move the machine short distances. Engage the transmission bypass valves on each side of the machine by moving both levers to the left. The
Cub Cadet TANK SZ 60 | TANK SZ 48 Operator's Manual - Page 12
the rear of the machine with the use of extensions. Also, access can be gained by reaching in from the sides over the tires fuel tanks. B 3. Install the reinforced plates, flat washers and flange lock nuts, but do not tighten. See Fig. 3-3. A C 12 Section 2- Assembly & Set-Up Figure
Cub Cadet TANK SZ 60 | TANK SZ 48 Operator's Manual - Page 13
8. Move the upper ROPS section to the upright position, and insert the locking pins with their retainer hairpin clips. See Fig. 3-6. 3. Place the belleville washer over the steering wheel and secure with the hex lock screw. See Fig. 3-8. Locking Pin Steering Wheel Cover Retainer Hairpin Clips
Cub Cadet TANK SZ 60 | TANK SZ 48 Operator's Manual - Page 14
Seat Adjustment Standard Seat (If equipped) This machine is equipped with an adjustable seat, which includes a retractable seat belt assembly and an Operator Presence Sensor (OPS). The OPS in the form of a switch, is integrated into the seat bottom and is connected to the machine electrical system.
Cub Cadet TANK SZ 60 | TANK SZ 48 Operator's Manual - Page 15
. 4. Attach the black cable to the negative battery terminal (-) with the bolt and hex nut. See Fig. 3-11. NOTE: If the battery is put into service after the date shown on top/side of battery, charge the battery prior to operating the machine. Section 2 - Assembly & Set-Up 15
Cub Cadet TANK SZ 60 | TANK SZ 48 Operator's Manual - Page 16
4 Forward Drive Pedal Reverse Drive Pedal Steering Column Adjustment Lever Tool Box Throttle Control Choke Knob Accessory Switch Receptacles Fuel Gauge Fuel Tank Cap Figure 4-1 NOTE: References to LEFT, RIGHT, FRONT, and REAR indicate that Power Take-Off (PTO) Switch position on the tractor when
Cub Cadet TANK SZ 60 | TANK SZ 48 Operator's Manual - Page 17
The tachometer provides engine speed (RPM), and service reminders (oil, lube) in the digital display are completed according to the instructions in this manual and the engine manual. Throttle Control The throttle onto the fuel tank after removing. WARNING! Never fill the fuel tank when the engine is
Cub Cadet TANK SZ 60 | TANK SZ 48 Operator's Manual - Page 18
settle to the maximum. Steering Column Adjustment Lever Fuel Gauge There is a fuel gauge on top of each of the two fuel tanks and measures the fuel level in each tank. Fuel Valve (Not Shown) The fuel valve is located behind the seat on the right side of the frame. OFF RIGHT
Cub Cadet TANK SZ 60 | TANK SZ 48 Operator's Manual - Page 19
-Up section for instructions on adjusting the seat. Safety Interlock System This machine is equipped with a safety interlock system for the protection of the operator. If the interlock system should ever malfunction, do not operate the machine. Contact your authorized Cub Cadet Dealer. • The safety
Cub Cadet TANK SZ 60 | TANK SZ 48 Operator's Manual - Page 20
the operator's seat to the most comfortable position that allows you to operate the controls. Refer to the Assembly & Set-Up section for instructions on adjusting the seat. 4. Adjust the steering wheel tilt with the steering column adjustment lever. 5. Release the parking brake. 6. Move the throttle
Cub Cadet TANK SZ 60 | TANK SZ 48 Operator's Manual - Page 21
Driving the Tractor Forward WARNING! Keep all movement of the drive pedals slow and smooth. Abrupt movement of the pedals can affect the stability of the tractor and could cause the tractor to flip over, which may result in serious injury or death to the operator. 1. Slowly push the forward drive
Cub Cadet TANK SZ 60 | TANK SZ 48 Operator's Manual - Page 22
WARNING! Make certain the area to be mowed is free of debris, sticks, stones, wire or other objects that can be thrown by the rotating blades. NOTE: Do not engage the mower deck when lowered in grass. Premature wear and possible failure of the 'V" belt and PTO clutch will result. Fully
Cub Cadet TANK SZ 60 | TANK SZ 48 Operator's Manual - Page 23
working as designed, contact you Cub Cadet dealer to have the tractor blades. Mulch blades work best when the grasses are cut at the highest levels, minimal lengths of grasses are removed, and grass conditions are generally dry. NOTE: Refer to the attachment and accessories section for a list of part
Cub Cadet TANK SZ 60 | TANK SZ 48 Operator's Manual - Page 24
and reduce turf defacement during turns. Rear Rollers: The rear rollers reduce scalping and gives grass a striped appearance. Cutting Blades: The cutting blades cut grass, create grass lift and discharge grass through the discharge chute. Discharge Chute: The discharge chute controls the mower
Cub Cadet TANK SZ 60 | TANK SZ 48 Operator's Manual - Page 25
Check gasoline level Check hydraulic hoses for leaks Check tires & tire pressure Check deck, mower and hydro drive belts Check blades and blade bolt tightness Check safety switches for proper operation Check fluid level in transmission oil expansion reservoir Check engine intake screen/cover Clean
Cub Cadet TANK SZ 60 | TANK SZ 48 Operator's Manual - Page 26
LUBRICATION CHART Use a grease-gun filled with NO. 2 Multipurpose Lithium Base Grease Number of Grease Fittings Description EVERY 25 HOURS 3 Blade Spindle Bearings WEEKLY 2 Front Wheels 2 Front Wheel Spindles 2 Mower Deck Ball Wheels Number of Grease Points Description WEEKLY 4 Mowing
Cub Cadet TANK SZ 60 | TANK SZ 48 Operator's Manual - Page 27
performed by a Cub Cadet Dealer. Changing the Engine Oil WARNING ! If the engine has been recently run, the engine, muffler and surrounding metal surfaces will be hot and can cause burns to the skin. Exercise caution to avoid burns. Maintain oil level as instructed in engine manual. Be careful not
Cub Cadet TANK SZ 60 | TANK SZ 48 Operator's Manual - Page 28
two tires, the mower will pull to one side. Keep the tires inflated to the recommended pressures. Improper inflation will shorten the tire service life. See the tire side wall for proper inflation pressures. Observe the following guidelines: • Do not inflate a tire above the maximum pressure shown
Cub Cadet TANK SZ 60 | TANK SZ 48 Operator's Manual - Page 29
area within reach of the hose where you won't have a problem with wet grass clippings. Disengage the PTO, engage the parking brake the instructions provided in the engine manual. WARNING! Never store the tractor with fuel in the tank indoors serviceability. Section 6 - Maintenance & Adjustments 29
Cub Cadet TANK SZ 60 | TANK SZ 48 Operator's Manual - Page 30
fill the fuel tank with clean, fresh gasoline. 5. Check the level of the the nut to lower the deck. The right front blade tip height is fixed so you must adjust the left instructions on adjusting the seat. Steering Wheel Column Refer to the Assembly & Set-Up section for instructions
Cub Cadet TANK SZ 60 | TANK SZ 48 Operator's Manual - Page 31
and pitch adjustment to achieve the correct blade-to-ground heights. If you remember that the front right blade tip adjustment is fixed and you level wheels are an anti-scalp feature of the deck and are not designed to support the weight of the cutting deck. The mower deck cutting height can be
Cub Cadet TANK SZ 60 | TANK SZ 48 Operator's Manual - Page 32
not require adjustment, but if necessary proceed as follows: 1. Flip up the seat and secure in place with the seat prop. Remove the battery as instructed in the Service section. NOTE: There is a cable for each of the transmissions, be sure to adjust both cables. Figure 6-6 NOTE: To adjust the right
Cub Cadet TANK SZ 60 | TANK SZ 48 Operator's Manual - Page 33
steering is not working and check the 20 amp fuse for all other electrical problems. If you have a recurring problem with blown fuses, have the tractor's electrical system checked by your Cub Cadet Service Dealer. Safety Switch Operation Checks The following operational checks should be made daily
Cub Cadet TANK SZ 60 | TANK SZ 48 Operator's Manual - Page 34
reverse the process. Replacing the PTO Belt 1. Remove the PTO belt from the deck as instructed in the Deck Removal section then remove it from around the PTO clutch. See Fig. 7-5. 60" Deck PTO Clutch Lynch Pin Figure 7-3 34 Section 7- Service 48" Deck PTO Belt PTO Clutch PTO Belt Figure 7-5
Cub Cadet TANK SZ 60 | TANK SZ 48 Operator's Manual - Page 35
blades. When servicing the mower deck, be careful not to cut yourself on the sharpened blades. 1. Remove the deck as instructed 60" deck and counter-clockwise on the 48" deck. See Fig. 7-7. While holding the deck idler, loosen the deck belt from the pulley and slide the belt away from the pulley. 60
Cub Cadet TANK SZ 60 | TANK SZ 48 Operator's Manual - Page 36
install the blade with the side of the blade marked ''Bottom'' (or with a part number stamped in it) facing the ground when the mower is in the operating position. WARNING! Use a torque wrench to tighten the blade spindle hex flange nut to between 100 lbs-ft and 120 lbs-ft. 36 Section 7- Service
Cub Cadet TANK SZ 60 | TANK SZ 48 Operator's Manual - Page 37
See your Cub Cadet dealer to have the transmission drive belt replaced. Tractor Creeping Creeping is the slight forward or backward movement of the mower when the throttle is on and the speed control pedals are in the neutral position. If your mower creeps, see an authorized service dealer. Section
Cub Cadet TANK SZ 60 | TANK SZ 48 Operator's Manual - Page 38
Troubleshooting Problem Excessive vibration Uneven cut Mower will not mulch grass (If Equipped w/Mulching Kit) Cause 1. Cutting blade loose or unbalanced. 2. Damaged or bent cutting blade. 1. Deck not leveled properly. 2. Dull blade. 3. Uneven tire pressure. 1. Engine speed too low. 2. Wet grass.
Cub Cadet TANK SZ 60 | TANK SZ 48 Operator's Manual - Page 39
Filter (SZ-48 & SZ-60 w/ Kohler) N/A Oil Filter (SZ-60 w/ Kawasaki) 754-04323 754-04319 Deck Belt (SZ-48) Deck Belt (SZ-60) 754-04326 754-04296 PTO Belt (SZ-48) PTO Belt (SZ-60) 754-04320 Drive Belt 02005017 02005019 Hi-Lift Blade, 17.0 (SZ-48) Hi-Lift Blade, 21.0 (SZ-60) 02000920A Deck
Cub Cadet TANK SZ 60 | TANK SZ 48 Operator's Manual - Page 40
Component Part Number and Description 634-3159 Deck Wheel 925-1707D Battery 951-12193 Gas Cap 746-04534 Throttle Control 746-04812 Choke Control 725-05000 Ignition Key 01006693 Discharge Chute Assembly 02002666 634-04734 Wheel Assembly (SZ-48), 23 x 9.50-12 Wheel Assembly (SZ-60),
Cub Cadet TANK SZ 60 | TANK SZ 48 Operator's Manual - Page 41
Attachments & Accessories Part No. 59A30033150 59A30036150 59A30035150 490-850-0005 490-850-0008 10 Part Power Assist Triple Bagger 72" Snow Blade Electric Deck Lift Blade Removal Tool Oil Siphon 41
Cub Cadet TANK SZ 60 | TANK SZ 48 Operator's Manual - Page 42
placed into service. The warranty period is two years. Subject to certain conditions and exclusions as stated below, the warranty on emission-related parts is as follows: 1. Any warranted part that is not scheduled for replacement as required maintenance in the written instructions supplied, is
Cub Cadet TANK SZ 60 | TANK SZ 48 Operator's Manual - Page 43
are covered (if applicable): (1) Fuel Metering System • Cold start enrichment system (soft choke) • Carburetor and internal parts (or fuel injection system) • Fuel pump • Fuel tank (2) Air Induction System • Air cleaner • Intake manifold (3) Ignition System • Spark plug(s) • Magneto ignition system
Cub Cadet TANK SZ 60 | TANK SZ 48 Operator's Manual - Page 44
CUB CADET LLC MANUFACTURER'S LIMITED WARRANTY FOR TANK M/TANK S/TANK L ZERO-TURN COMMERCIAL RIDING MOWER IMPORTANT: To obtain warranty coverage owner must present an original proof of purchase and applicable maintenance records to the servicing dealer. Please see the operator's manual for