Cuisinart EM-400 Owner Manual - Page 10

9

TROUBLESHOOTING

Problem: Machine does not have power.

Solution:

plugged in.

the controls are illuminated.

Problem: Machine will not brew.

Solution:

seconds or more. When you plug the

machine back in, be sure to turn the power

back on.

Problem:

Chlorine or mineral taste

in coffee.

Solution:

Problem:

Doesn’t brew a full cup.

Solution:



back on.

Problem:

The used capsule will not fall

into the capsule container.

Solution:

Empty the capsule container and then try

again. (You may need to manually remove

the used capsule from the brew head.)

Problem:

I want to reset the espresso/

coffee programming.

Solution:

Problem:

The control lights are not as

bright as they were.

Solution:

that dims the lights and power by about 50%

after 30 minutes of non-use. Restore full

power by pressing any button.

Problem: Machine turned off.

Solution:

the unit off after 60 minutes of non-use.

Problem: Espresso/coffee is too hot.

Solution:

If hot is desired, press and hold the

TEMPERATURE

button for 3 seconds to

allow the temp to decrease. The flashing light

will turn off when it has reached lower

temperature.

Problem:

SHORT

/

LONG

/ and

COFFEE

buttons flash.

Solution:

Refill the water reservoir or make sure it is

properly engaged on the base.

Problem:

Machine takes longer than

normal to brew.

Solution:



back on.

Problem:

Coffee temperature is lower

than normal.

Solution:



back on.

Cuisinart EM-400 Owner Manual - Page 10

Troubleshooting

Page 10 highlights