D-Link DAP-1330 Quick Installation Guide
D-Link DAP-1330 Manual
 |
View all D-Link DAP-1330 manuals
Add to My Manuals
Save this manual to your list of manuals |
D-Link DAP-1330 manual content summary:
- D-Link DAP-1330 | Quick Installation Guide - Page 1
DAP-1330 N300 Wi-Fi Range Extender Quick Install Guide - D-Link DAP-1330 | Quick Installation Guide - Page 2
router or access point does not support WPS, follow the steps under Configure the DAP-1330 Using a Web Browser to connect to the DAP-1330 and run the Setup Wizard. If you are not sure how to enable WPS on your wireless router, please refer to your router's user manual. 2 DAP-1330 Install Guide - D-Link DAP-1330 | Quick Installation Guide - Page 3
Reset Button LED Status LED Color Red Amber Green Status Description Solid The device is powering on/booting up. Blinking The device is ready but not connected to an uplink router. Solid Indicates that the DAP-1330 is securely connected to your wireless router or access point. Blinking - D-Link DAP-1330 | Quick Installation Guide - Page 4
Connect to Your Router Using WPS 1 Find an available outlet near your wireless router. Plug in the DAP-1330 and wait until the Status LED is blinking amber. DAP-1320 2 Press the WPS (Wi-Fi Protected Setup) button on your wireless router. 3 Within one minute, press the WPS button on the DAP-1330. The - D-Link DAP-1330 | Quick Installation Guide - Page 5
your wireless router and the area that you need wireless coverage. If the signal strength indicators are showing one single amber bar or if the DAP-1330 is not connecting, move the DAP-1330 to a wall outlet closer to your wireless router or access point. DAP-1330 Install Guide 5 - D-Link DAP-1330 | Quick Installation Guide - Page 6
device is now connected to the DAP-1330 and can connect to your wireless router. If you want to change your network settings, password, etc., follow the steps on the next page to configure the DAP-1330. To connect additional devices, repeat step 5. Your setup is complete! 6 DAP-1330 Install Guide - D-Link DAP-1330 | Quick Installation Guide - Page 7
cable. Wi-Fi Name(SSID): dlink-2c19 Wi-Fi Password: gccnu80856 Web browser link: http://dlinkap2c19.local. 3 Open a web browser (e.g., Internet Explorer, Firefox, Safari, or Chrome) and enter http://dlinkap.local./. You may also enter the IP address of the DAP-1330. DAP-1330 Install Guide 7 - D-Link DAP-1330 | Quick Installation Guide - Page 8
to your router and view the DHCP table to see what IP address was assigned to the DAP-1330. The MAC address is printed on the label on the device. 4 Once you connect, the login page will appear. Enter your password and click Log in. By default the password is blank. Note: If this is the first time - D-Link DAP-1330 | Quick Installation Guide - Page 9
want to manually select the wireless network you want to extend, click Extend an existing wireless network and go to the next page. If you want to connect the DAP-1330 to a wired network using an Ethernet cable, click Add wireless to your wired network and skip to page 11. DAP-1330 Install Guide 9 - D-Link DAP-1330 | Quick Installation Guide - Page 10
list of detected wireless networks within range of the DAP-1330 will appear. Click on the network you want to extend. If you want to manually type in the Wi-Fi network name (SSID), click Manual at the bottom. 9 If your wireless network is secure/encrypted, enter the Wi-Fi password and click Next to - D-Link DAP-1330 | Quick Installation Guide - Page 11
If you clicked "Add wireless to your wired network" 8 Connect the DAP-1330 to your network using an Ethernet cable.The wizard will automatically go to step 10 on the next page. If you wish to connect the DAP1330 later, click Skip. DAP-1330 Install Guide 11 - D-Link DAP-1330 | Quick Installation Guide - Page 12
10 Enter a new Wi-Fi network name for the DAP-1330 and enter a new Wi-Fi password. Click Next to continue. 11 Enter an administrator password for the DAP-1330. This is the password you will use to enter the web-based configuration. Click Next to continue. 12 DAP-1330 Install Guide - D-Link DAP-1330 | Quick Installation Guide - Page 13
want to make any changes, click Back. Setup is now complete. Allow about two minutes for the DAP-1330 reboot. Verify that the Status light is green and the signal strength indicators are lit. You can now unplug the DAP-1330 and connect to a different location if needed. DAP-1330 Install Guide 13 - D-Link DAP-1330 | Quick Installation Guide - Page 14
connected directly to the router. How do I change the wireless settings on the DAP-1330? 1. Open a web browser (e.g., Internet Explorer, Firefox, Chrome, or Safari) and go to http://dlinkap.local./ or enter the IP address (http://192.168.0.50 by default). 2. At the login screen, enter your password - D-Link DAP-1330 | Quick Installation Guide - Page 15
my DAP-1330 when using it as a range extender? A Range Extender only works as well as the signal it is extending. Therefore, proper placement of your DAP-1330 is important in achieving desired results. ! ! Ideal Poor location location Ideal Poor location location ! ! ! ! A Range Extender - D-Link DAP-1330 | Quick Installation Guide - Page 16
if I forgot my DAP-1330 password? 1. If you forgot your password or want to reset the DAP-1330 back to the factory default settings, press and hold the reset button on the bottom of the extender using a paper clip and release after a minimum of 10 seconds. The Status light will turn red. Note: This - D-Link DAP-1330 | Quick Installation Guide - Page 17
REQUEST D-Link Systems, Inc. 17595 Mt. Herrmann Street Fountain Valley, CA 92708 GNU GENERAL PUBLIC LICENSE Version 3, 29 June 2007 Copyright (C) 2007 Free Software Foundation, Inc. View the full GPL Code Statement at http://www.gnu.org/licenses/gpl.html DAP-1330 Install Guide 17 - D-Link DAP-1330 | Quick Installation Guide - Page 18
Notes 18 DAP-1330 Install Guide - D-Link DAP-1330 | Quick Installation Guide - Page 19
Notes DAP-1330 Install Guide 19 - D-Link DAP-1330 | Quick Installation Guide - Page 20
Technical Support This guide is for first time configuration. Please refer to the user manual to learn more. U.S. and Canadian customers can contact D-Link Technical Support through our website. USA http://support.dlink.com/DAP-1330 Canada http://support.dlink.ca/DAP-1330 Version 1.01(US) October 5,
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
 |
 |
DAP-1330
Quick Install Guide
N300 Wi-Fi Range Extender