D-Link DAP-3690 Product Manual - Page 19
WDS mode
View all D-Link DAP-3690 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Section 3 - Configuration WDS mode In WDS mode, the DAP-3690 wirelessly connects multiple networks, without functioning as a wireless AP. After completing the desired settings, click the Save button to let your changes take effect. Wireless Band: Select either 2.4 GHz or 5 GHz from the drop-down menu. Mode: WDS is selected from the drop-down menu. Network Name Service Set Identifier (SSID) is the name designated for a specific (SSID): wireless local area network (WLAN). The SSID's factory default setting is dlink. The SSID can be easily changed to connect to an existing wireless network or to establish a new wireless network. SSID Visibility: Enable or Disable SSID visibility. Enabling this feature broadcasts the SSID across the network, thus making it visible to all network users. Auto Channel Enabling this feature automatically selects the channel that Selection: will provide the best wireless performance. This feature is not supported in WDS mode. Channel: All devices on the network must share the same channel. To change the channel, use the drop-down menu to make the desired selection. Channel Width: Allows selection of the channel width you would like to operate in. 20 MHz and Auto 20/40 MHz allow both 802.11n and non-802.11n wireless devices on your network when the wireless mode is Mixed 802.11 b/g/n in 2.4G and Mixed 802.11 a/n in 5G. 802.11n wireless devices are allowed to transmit data using 40 MHz when the channel width is Auto 20/40 MHz. D-Link DAP-3690 User Manual 19