D-Link DAP-X2850 Product Manual 1 - Page 56
Static Pool Setting, Function Enable/Disable, Assigned IP, Assigned MAC Address, Subnet Mask
View all D-Link DAP-X2850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Section 3 - Configuration Static Pool Setting The DHCP address pool defines the range of IP addresses that can be assigned to stations on the network. A static pool allows specific wireless stations to receive a fixed IP without time control. Function Enable/Disable: Dynamic Host Configuration Protocol (DHCP) assigns IP addresses to wireless devices on the network. This protocol simplifies network management and allows new wireless devices to receive IP addresses automatically without the need to manually assign IP addresses. Select Enable to allow the DAP-X2850 to function as a DHCP server. Assigned IP: Use the Static Pool Settings to assign the same IP address to a device every time you start up. The IP addresses assigned in the Static Pool list must NOT be in the same IP range as the Dynamic Pool. After you have assigned a static IP address to a device via its MAC address, click Apply; the device will appear in the Assigned Static Pool at the bottom of the screen. You can edit or delete the device in this list. Assigned MAC Address: Enter the MAC address of the device requesting association here. Subnet Mask: Define the subnet mask of the IP address specified in the "IP Assigned From" field. D-Link DAP-X2850 User Manual 56