D-Link DCS-2530L User Manual - Page 33
Image Setup, Enable Privacy Mask, Setting, Mirror, Anti Flicker, White Balance, Exposure Mode - reset
View all D-Link DCS-2530L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Section 3: Configuration Image Setup In this section, you can configure the video image settings for your camera. Enable Privacy Mask The Privacy Mask setting allows you to specify up to 3 rectangular areas Setting: on the camera's image to be blocked/excluded from recordings and snapshots. You may click and drag the mouse cursor over the camera image to draw a mask area. Right-clicking on the camera image brings up the following menu options: Disable All: Disables all mask areas Enable All: Enables all mask areas Reset All: Clears all mask areas. Mirror: This will mirror the image horizontally. Flip: This will flip the image vertically. If the camera is installed upside down, Flip and Mirror should both be checked. Anti Flicker: Select the frequency used by your power lines to avoid interference or distortion. White Balance: Use the drop-down box to change white balance settings to help balance colors for different environments. You can choose from Auto, Outdoor, Indoor, and Fluorescent. Exposure Mode: Changes the exposure mode. Use the drop-down menu to set the camera for Outdoor, Indoor, or Night environments, or to Moving to capture moving objects. The Low Noise option will focus on creating a high-quality picture with reduced noise when monitoring low-light environments. You can also create three different custom exposure modes that let you set the minimum and maximum shutter speeds. The Max Gain setting will allow you to control the maximum amount of gain to apply to brighten the picture. D-Link DCS-2530L User Manual 33