D-Link DCS-3220G_revB Product Manual - Page 129
I/O Connector
View all D-Link DCS-3220G_revB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
I/O Connector I/O Connector Definition for the Internet Camera The DCS-3220G provides a general I/O terminal block with one digital input and one relay switch for device control. Pin 1 and pin 2 can be connected to an external sensor and the state of voltage will be monitored from the initial state 'LOW'. The relay switch of pin 3 and pin 4 can be used to turn the external device on or off. The I/O connector provides the physical interface for digital output (DO) and digital input (DI) that is used for connecting a diversity of external alarm devices to the Internet Camera such as IR-Sensors and alarm relays. The digital input is used for connecting external alarm devices and once triggered images will be taken and e-mailed. I/O Connector I/O Terminal Block: 1 SW_COMMON 2 SW_NOPEN 3 DI+ 4 DI- OUTPUT (open from SW_OPEN at initial state) (close with SW_OPEN when set DO to ON) OUTPUT (Max. 1A, 24VDC or 0.5A, 125VAC) INPUT (Max. 50mA, 12VDC) INPUT (Initial state of DI is low) 129