D-Link DCS-3220G_revB Product Manual - Page 40
Configuration > Advanced >Network Settings continued, Channel, TX Rate, Preamble
View all D-Link DCS-3220G_revB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Using the DCS-3220G with an Internet browser (continued) Configuration > Advanced >Network Settings (continued) Channel - The default wireless channel setting is channel 6. Select the channel that is the same as the other wireless devices on your network. TX Rate- Select the transmission rate on the network. Auto is the default setting. Preamble- Select Long or Short Preamble. The Preamble defines the length of the CRC block (Cyclic Redundancy Check is a common technique for detecting data transmission errors) for communication between the Access Point and the roaming wireless Network adapters. Short Preamble is the default setting. Note: High network traffic areas should use the shorter preamble type. Data Encryption - Enable Encryption by clicking on the box. The DCS-3220G has Encryption disabled as the default setting. Auth mode - Choose one of the following authorization modes: Open Authentication - Communicates the key across the network. Shared Authentication - Allows communication only with other devices with identical WEP settings. Auto - Will automatically adjust to the Authentication mode of the wireless client. Key type - Select the key length, either 64 or 128 bits. Key Format Key Index - Select an ASCII or hexadecimal key format. You can create up to 4 different security keys. Click Apply to make changes effective 40