D-Link DCS-920 Product Manual
D-Link DCS-920 - SECURICAM Wireless G Internet Camera Network Manual
 |
UPC - 790069313783
View all D-Link DCS-920 manuals
Add to My Manuals
Save this manual to your list of manuals |
D-Link DCS-920 manual content summary:
- D-Link DCS-920 | Product Manual - Page 1
- D-Link DCS-920 | Product Manual - Page 2
20 Standard Wireless Settings 21 Viewing Your Internet Camera 23 Configuration 25 Live Video 25 Setup > Wizard 25 Internet Connection Setup Wizard 26 Network Setup 28 Setup > Wireless 29 Wireless Interface 29 D-Link DCS-910/920 User Manual Setup > DDNS 30 Setup > Image Setup 31 Image - D-Link DCS-920 | Product Manual - Page 3
Table of Contents Wireless Basics 60 Networking Basics 65 Check your IP address 65 Statically Assign an IP address 66 Technical Specifications 67 Contacting Technical Support 69 Warranty 70 Registration 75 D-Link DCS-910/920 User Manual - D-Link DCS-920 | Product Manual - Page 4
Section 1 - Product Overview PParocdkuacgteOCvoenrtveinetws • DCS-910/920 Internet Camera • CAT5 Ethernet Cable • Power Adapter • Antenna (available only for the DCS-920) • Manual and Software on CD • Quick Install Guide • Camera Stand Note: Using a power supply with a different voltage than the - D-Link DCS-920 | Product Manual - Page 5
interface offer easy integration with your Ethernet/Fast Ethernet or 802.11b/g wireless* network. The DCS-910/920 also comes with remote monitoring capability for a complete and cost-effective home security solution. * Wireless is available only for the DCS-920 D-Link DCS-910/920 User Manual - D-Link DCS-920 | Product Manual - Page 6
to manage and control the Internet Camera anytime, anywhere in the world. Many applications exist, including industrial and public monitoring of homes, offices, banks, hospitals, child-care centers, and amusement parks. * Wireless is available only for the DCS-920 D-Link DCS-910/920 User Manual - D-Link DCS-920 | Product Manual - Page 7
Section 1 - Product Overview Hardware Overview Front View Wireless Antenna* Camera Lens Power and Link LED * Wireless Antenna is provided with the DCS-920 only. D-Link DCS-910/920 User Manual Camera Stand - D-Link DCS-920 | Product Manual - Page 8
Section 1 - Product Overview Rear View Wireless Antenna* Reset Ethernet Connector * Wireless Antenna is provided with the DCS-920 only. D-Link DCS-910/920 User Manual Power Connector Camera Stand - D-Link DCS-920 | Product Manual - Page 9
located on the bottom panel of the DCS-910/920 and attach it to the network. Network Connectivity is confirmed when the green LED Indicator on the DCS-910/920, located below the Power LED, is illuminated. * Wireless Antenna is provided with the DCS-920 only. D-Link DCS-910/920 User Manual - D-Link DCS-920 | Product Manual - Page 10
the Internet Camera back panel socket cavity. Attach the camera stand to the Internet Camera and station it for your application. There are holes located in the base of the camera stand allowing the Internet Camera to be mounted to the ceiling, or any wall securely. D-Link DCS-910/920 User Manual - D-Link DCS-920 | Product Manual - Page 11
Section 2 - Installation Installation Wireless Installation Considerations The D-Link Wireless* Internet Camera lets you access your network using a wireless connection from anywhere within the operating range of your wireless network. However, the number, thickness and location of walls, ceilings - D-Link DCS-920 | Product Manual - Page 12
- Installation Software Installation Turn on the computer and Insert the D-Link DCS-910/920 Driver CD in the CD-ROM drive. The following step-by-step instructions will be shown in Windows® XP. The similar steps and screens will be shown for other Windows operating systems. Click Setup Wizard If - D-Link DCS-920 | Product Manual - Page 13
Section 2 - Installation Click Next to continue. Click Next Click Yes to accept the License Agreement. Click Yes D-Link DCS-910/920 User Manual 13 - D-Link DCS-920 | Product Manual - Page 14
Section 2 - Installation To start the installation click Next. Note: The installation may take several minutes to complete. Click Next Please wait while the Setup Wizard is being installed. D-Link DCS-910/920 User Manual 14 - D-Link DCS-920 | Product Manual - Page 15
Section 2 - Installation Click Finish to complete the installation. Click Finish D-Link DCS-910/920 User Manual 15 - D-Link DCS-920 | Product Manual - Page 16
Link Setup Wizard SE icon that was created in your Windows Start menu. The Setup Wizard will appear and display the MAC address of the DCS-910/920, and an IP Address (which may or may not be correct depending on what you have your DCS-910/920 connected to). If you have a DHCP server on your network - D-Link DCS-920 | Product Manual - Page 17
The following options are available on the Installation Wizard screen: Your camera's IP Address will be displayed along with its corresponding MAC Address here. Your camera's IP Address will be displayed here along with its corresponding MAC Address. Click Wizard D-Link DCS-910/920 User Manual 17 - D-Link DCS-920 | Product Manual - Page 18
the admin ID and password. Note: The default Admin ID is admin with the password left blank. Click Next Select DHCP if you want to obtain a new IP address every time the camera boots up, or select static IP to use the same IP address at each boot up. Click Next D-Link DCS-910/920 User Manual 18 - D-Link DCS-920 | Product Manual - Page 19
next screen that appears will allow you to use WPS or Standard Wireless Settings to connect to your router. If you want to use the like to connect your router with Standard Wireless Settings, please continue to page 21. Select Standard wireless settings Click Next D-Link DCS-910/920 User Manual 19 - D-Link DCS-920 | Product Manual - Page 20
Section 3 - Configuration WPS - Push Button Setup Note: Click PUSH or Next to continue. Select PBC Click Next Once your camera has finished WPS - Push Button Configuration setup, click OK and continue to the "Viewing Your Internet Camera" section on page 23. D-Link DCS-910/920 User Manual 20 - D-Link DCS-920 | Product Manual - Page 21
your wireless network information. Select your wireless security settings, and click Next. Note: Wireless is available only for the DCS-920. Click Next Enter your wireless encryption key and click Next. Note: Wireless is available only for the DCS-920. Click Next D-Link DCS-910/920 User Manual 21 - D-Link DCS-920 | Product Manual - Page 22
Section 3 - Configuration If you need to make any changes, click Back to modify your settings. Otherwise, click Restart to save and apply your settings. Note: Wireless is available only for the DCS-920. Click Restart D-Link DCS-910/920 User Manual 22 - D-Link DCS-920 | Product Manual - Page 23
will automatically open your web browser to the IP address of the DCS-910/920, in this example it is: http://192.198.0.102. Your DCS-910/920 may have a different IP Address. Enter admin as the default username and leave the password blank. Click OK to continue. D-Link DCS-910/920 User Manual 23 - D-Link DCS-920 | Product Manual - Page 24
be downloaded at no cost from Sun's web site. (http://www.java.com) • When you connect to the home page of your camera, you will be prompted to download ActiveX. If you want to use ActiveX to view your video images instead of Java, then you must download ActiveX. D-Link DCS-910/920 User Manual 24 - D-Link DCS-920 | Product Manual - Page 25
mode to view video. Setup > Wizard You may choose to configure your network by using the Internet Connection Setup Wizard that includes step-by-step instructions. Otherwise, you may manually configure your connection using the Manual Internet Connection Setup. D-Link DCS-910/920 User Manual 25 - D-Link DCS-920 | Product Manual - Page 26
your device. • Static IP Address, or • PPPoE connection, where your camera is directly connected to the Internet through a DSL modem. * Input the DNS information if you have chosen and assigned a Static IP Address for your camera. Click Next to proceed. Click Next D-Link DCS-910/920 User Manual 26 - D-Link DCS-920 | Product Manual - Page 27
account and would like the camera to update your IP address automatically, enable DDNS and enter your host information. Click Next to proceed. Click Next Enter a name for your camera. Then, click Next to the setting, or Back to change your settings. Click Apply D-Link DCS-910/920 User Manual 27 - D-Link DCS-920 | Product Manual - Page 28
be opened on the router. For example, if the port is changed to 1010, users must type in the web browser "http://192.168.0.100:1010" instead of "http://192.168.0.100". UPnP Settings: Enable this setting to configure your camera as an UPnP device in the network. D-Link DCS-910/920 User Manual 28 - D-Link DCS-920 | Product Manual - Page 29
Section 3 - Configuration Setup > Wireless In this section, you can setup and configure the wireless settings on your camera. Note: Wireless is available only for the DCS-920. Wireless Interface SSID: Service Set Identifier, an identifier for your wireless network. Channel: The default setting is - D-Link DCS-920 | Product Manual - Page 30
. Server Address: Select your Dynamic DNS Server from the pull down menu. Host Name: Enter the host name of the DDNS server. User Name: Enter your username or e-mail used to connect to the DDNS. Password: Enter your password used to connect to the DDNS server. D-Link DCS-910/920 User Manual 30 - D-Link DCS-920 | Product Manual - Page 31
Setup > Image Setup In this section, you can configure the image settings for your camera. Image Settings Enable Antiflicker: Check to enable antiflicker. Flip Image: Vertically rotates the video. If the camera Control: Allows you to adjust the saturation level. . D-Link DCS-910/920 User Manual 31 - D-Link DCS-920 | Product Manual - Page 32
obtain better quality. However, it will use more resource within your network. Quality: Select the desired image quality from five levels: Highest, High, Medium, Low, and Lowest. Light Frequency: Select the proper frequency (50Hz or 60Hz) to reduce image flicker. D-Link DCS-910/920 User Manual 32 - D-Link DCS-920 | Product Manual - Page 33
e-mail This is the e-mail address of recipient for the SMTP server. Address: User Name: If the SMTP server uses authentication, you must enter your user name here. Password: This is the password that you use with your user name to connect to the SMTP server. D-Link DCS-910/920 User Manual 33 - D-Link DCS-920 | Product Manual - Page 34
section. If you have configured the SMTP Account: account correctly, you will be able to send a test file to the e-mail account of the recipient. D-Link DCS-910/920 User Manual 34 - D-Link DCS-920 | Product Manual - Page 35
the password to access the external FTP server. Directory Path: Specifies the destination folder in the external FTP server. Passive Mode: Enabling passive mode will allow access to an external FTP server if your camera is behind a router protected by a firewall. D-Link DCS-910/920 User Manual 35 - D-Link DCS-920 | Product Manual - Page 36
Name: This will be the name that precedes the time, for example DCS9202008072116425101.jpg.This means that the camera took a snapshot in the year 2008, July 21 at 16th hour (4 o'clock), 42 minutes and 51 seconds will be able to see a test file in your FTP server. D-Link DCS-910/920 User Manual 36 - D-Link DCS-920 | Product Manual - Page 37
synchronize your camera with an Internet time server. Choose the one that is closest to your camera, Copy your Computer's Time Click to synchronize the time information from your Settings: PC. Set the Date and Time Select this to set the time manually. Manually: D-Link DCS-910/920 User Manual 37 - D-Link DCS-920 | Product Manual - Page 38
Section 3 - Configuration Maintenance > Device Management In this section, you can change the administrator's password and configure the server settings for your camera.You can also manage the user account(s) that access to your camera. D-Link DCS-910/920 User Manual 38 - D-Link DCS-920 | Product Manual - Page 39
Section 3 - Configuration Maintenance > Backup and Restore In this section, you can save and restore your configuration, restore the factory settings, and/or restart the camera. D-Link DCS-910/920 User Manual 39 - D-Link DCS-920 | Product Manual - Page 40
-910/920, please download and save the latest firmware version from the D-Link Support Page to your local hard drive. Locate the file on your local hard drive by using the Browse button. Then, open the file and click the "Upload" button to start the firmware upgrade. D-Link DCS-910/920 User Manual - D-Link DCS-920 | Product Manual - Page 41
Section 3 - Configuration Status > System This section displays all the details information about your device and network settings. D-Link DCS-910/920 User Manual 41 - D-Link DCS-920 | Product Manual - Page 42
IP surveillance. Insert the CD-ROM into the CD-ROM drive. A menu screen will appear as shown below. Click D-ViewCam D-ViewCam provides English, Traditional Chinese and Simplified Chinese language versions. Select a language version and click OK to continue. Click OK D-Link DCS-910/920 User Manual - D-Link DCS-920 | Product Manual - Page 43
Section 3 - Configuration Click Next to continue. Click Next Click Browse if you would like to choose a specific folder for the installation, otherwise click Next to continue. Click Next D-Link DCS-910/920 User Manual 43 - D-Link DCS-920 | Product Manual - Page 44
Section 3 - Configuration Click Next to start the installation. Note: The D-ViewCam installation process may take several minutes to complete. Click Next Click Finish to complete the installation. Click Finish D-Link DCS-910/920 User Manual 44 - D-Link DCS-920 | Product Manual - Page 45
> All Programs > D-Link > D-Link D-ViewCam. Enter Admin as the default user name and leave the password blank. Click / OK to log into the system and access the Add Camera Wizard. Note: Please refer to page 51 in the D-ViewCam user manual to change your password. D-Link DCS-910/920 User Manual 45 - D-Link DCS-920 | Product Manual - Page 46
Section 3 - Configuration Welcome to the Add Camera Wizard. Use this wizard to add your cameras to the D-ViewCam system. Note: Use the left or right arrow to navigate the wizard. Click / Next to continue. Click Next D-Link DCS-910/920 User Manual 46 - D-Link DCS-920 | Product Manual - Page 47
located on the same LAN with same subnet. The system will place all of the cameras under the default map called My Map. Click Next to continue. DCS-910-55 If you choose Add Manually, you will need to enter the IP address of the camera(s). Click Next to continue. D-Link DCS-910/920 User Manual 47 - D-Link DCS-920 | Product Manual - Page 48
Section 3 - Configuration D-ViewCam shows the detected IP camera(s) information. You can choose and schedule the recording for each camera. • 24/7 Continuous Recording: Continuously recording 24 when motion is detected. Click Next to continue. DCS-910-55 DCS-910 D-Link DCS-910/920 User Manual 48 - D-Link DCS-920 | Product Manual - Page 49
camera(s) to be added. Click Next to continue. The Add Camera wizard is now complete. Click Close to access the D-ViewCam's main screen. Your D-ViewCam Installation is Complete! Note: Please refer to the D-ViewCam user manual for information about using D-ViewCam. D-Link DCS-910/920 User Manual - D-Link DCS-920 | Product Manual - Page 50
encrypting data over your wireless network so that it is protected as it is transmitted from one wireless device to another. To gain access to a WEP network, you must know HEX for use over the network. Four keys can be defined so that you can change keys easily. D-Link DCS-910/920 User Manual 50 - D-Link DCS-920 | Product Manual - Page 51
or key to authenticate your wireless connection. The key is an alpha-numeric password between 8 and 63 characters long. The password can include symbols (!?*&_) and spaces. This key must be the exact same key entered on your wireless router or access point. D-Link DCS-910/920 User Manual 51 - D-Link DCS-920 | Product Manual - Page 52
D-Link DI-624 Wireless Router • Ethernet based PC for system configuration Setting Up the DCS-910/920 For Use Behind a Router Installing a DCS-910/920 Internet Camera on your network is an easy 4-step procedure: 1. Assign a Local IP Address to Your Internet Camera 2. View the Internet Camera Using - D-Link DCS-920 | Product Manual - Page 53
Area Network (LAN) until the router is configured to allow remote viewing of the camera over the Internet. 1. Assign a Local IP Address to Your Camera Run the Setup Wizard program from the CD included with the DCS-910/920. Follow the steps in the Quick Installation Guide to configure the DCS-910/920 - D-Link DCS-920 | Product Manual - Page 54
camera. You are able to view this screen from any PC running Internet Explorer on your LAN. Click on the Configuration button on the left side of the display. Scroll to the bottom of the Network Configuration page to display the ports used by HTTP and Streaming video. D-Link DCS-910/920 User Manual - D-Link DCS-920 | Product Manual - Page 55
your router (as shown on the next page). The WAN IP Address will be listed. This will be the address that you will need to type in your Web browser to view your camera over the Internet. Your WAN IP Address will be listed on the router's Status > Device Info page. D-Link DCS-910/920 User Manual 55 - D-Link DCS-920 | Product Manual - Page 56
port and both (TCP and UDP) for the Video channel port. 5. If you are using the default camera port settings, enter 80 into the Public and Private Port section, click Apply. 6. Scheduling should be set to Always so that the camera images can be accessed at any time. D-Link DCS-910/920 User Manual - D-Link DCS-920 | Product Manual - Page 57
are the same, so refer to your user manual for specific instructions on how to open ports. Enter valid ports in the Virtual Server section of your router. Please make sure to check the box next to the camera name on the Virtual Server List to enable your settings. D-Link DCS-910/920 User Manual 57 - D-Link DCS-920 | Product Manual - Page 58
which is DC 5V, for the Internet Camera. Also verify that the power supply is well connected, and/or the option to turn off the LED is enabled. 2. Why does the LAN LED not light up properly? There might be a problem with the network cable. To confirm that the cables are working, PING the address of - D-Link DCS-920 | Product Manual - Page 59
on your browser to allow the ActiveX plug-in to be installed. If you are using Internet Explorer with a version number of lower than 5, then you will need to upgrade your Web browser software in order to view the streaming video transmitted by the Internet Camera. D-Link DCS-910/920 User Manual 59 - D-Link DCS-920 | Product Manual - Page 60
for mobile network devices to link to a conventional Ethernet LAN in order to use servers, printers or an Internet connection supplied through the wired LAN. A Wireless Router is a device used to provide this link. * Wireless is available only for the DCS-920 D-Link DCS-910/920 User Manual 60 - D-Link DCS-920 | Product Manual - Page 61
network. Why D-Link Wireless? D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. DLink delivers the performance you need at a price you can afford. D-Link , golf courses, and many other outdoor venues. D-Link DCS-910/920 User Manual 61 - D-Link DCS-920 | Product Manual - Page 62
is using it, whether it's for home, office, business, D-Link has a wireless solution for it. Home • Gives everyone at home broadband access • network from home • Share Internet connection and printer with multiple computers • No need to dedicate office space D-Link DCS-910/920 User Manual 62 - D-Link DCS-920 | Product Manual - Page 63
Link Cardbus Adapter with your laptop, you can access the hotspot to connect to Internet from remote locations like: Airports, Hotels, Coffee Shops, Libraries, Restaurants, and Convention Centers. Wireless network is easy to setup they operate on same frequency. D-Link DCS-910/920 User Manual 63 - D-Link DCS-920 | Product Manual - Page 64
the wireless devices, or clients, will connect to the wireless router or access point. An Ad-Hoc network contains only clients, such as laptops with wireless cardbus adapters. All the adapters must be in Ad-Hoc mode to communicate. * Applicable only for the DCS-920 D-Link DCS-910/920 User Manual - D-Link DCS-920 | Product Manual - Page 65
firewall software programs may block a DHCP request on newly installed adapters. If you are connecting to a wireless network at a hotspot (e.g. hotel, coffee shop, airport), please contact an employee or administrator to verify their wireless network settings. D-Link DCS-910/920 User Manual 65 - D-Link DCS-920 | Product Manual - Page 66
network. Set Default Gateway the same as the LAN IP address of your router (192.168.0.1). Set Primary DNS the same as the LAN IP address of your router (192.168.0.1).The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step 5 Click OK twice to save your settings. D-Link DCS - D-Link DCS-920 | Product Manual - Page 67
environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. ** Applicable only for the DCS-920 *** Environmental conditions may adversely affect wireless signal range. D-Link DCS-910/920 User Manual 67 - D-Link DCS-920 | Product Manual - Page 68
Power Consumption: • DCS-910 (3.25W), DCS-920 (4.25W) Environmental specification • Operating temperature: 0°C to 40°C (32°F to 104°F) • Storage temperature: -20°C to 70°C (-4°F to 158°F) • Operating relative humidity: 20% to 80% non-condensing Warranty: • 1 Year D-Link DCS-910/920 User Manual 68 - D-Link DCS-920 | Product Manual - Page 69
contact D-Link technical support through our Web site, or by phone. Tech Support for customers within Canada: D-Link Technical Support over the Telephone: (800) 361-5265 English: 24 Hours - 7 Days French: Lundi - Vendredi 9h - 21h D-Link Technical Support over the Internet: http://support.dlink.ca - D-Link DCS-920 | Product Manual - Page 70
price paid. Any repair or replacement will be rendered by D-Link at an Authorized D-Link Service Link and its suppliers under this Limited Warranty will be, at D-Link's option, to replace the non-conforming Software (or defective media) with software that substantially D-Link DCS-910/920 User Manual - D-Link DCS-920 | Product Manual - Page 71
Appendix E - Warranty conforms to D-Link's functional specifications for the Software or to refund the portion of the actual purchase price paid that is attributable to the Software. Except as otherwise agreed by DLink in writing, the replacement Software is provided only to the original licensee, - D-Link DCS-920 | Product Manual - Page 72
manual for the product, and normal maintenance; Damage that occurs in shipment, due to act of God, failures due to power surge, and cosmetic damage; Any hardware, software, firmware or other products or services provided by anyone other than D-Link OF THE PRODUCT. D-Link DCS-910/920 User Manual 72 - D-Link DCS-920 | Product Manual - Page 73
. Copyright 2008 by D-Link Corporation/D-Link Canada, Inc. All rights reserved. CE Mark Warning: This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. D-Link DCS-910/920 User Manual 73 - D-Link DCS-920 | Product Manual - Page 74
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee outside the United States, please contact the corresponding local D-Link office. D-Link DCS-910/920 User Manual 74 - D-Link DCS-920 | Product Manual - Page 75
Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Version 1.2 April 24, 2009 D-Link DCS-910/920 User Manual 75
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
 |
 |
