D-Link DCS-920 Product Manual - Page 57
Repeat the above steps adding the port 80 to both the Public and Private Port s. A check mark - how to open port for setting up
UPC - 790069313783
View all D-Link DCS-920 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Section 4 - Security Repeat the above steps adding the port 80 to both the Public and Private Port sections. A check mark appearing before the entry name will indicate that the ports are enabled. Important: Some ISPs block access to port 80 and other commonly used Internet ports to conserve bandwidth. Check with your ISP so that you can open the appropriate ports accordingly. If your ISP does not pass traffic on port 80, you will need to change the port the camera uses from 80 to something else, such as 800. Not all routers are the same, so refer to your user manual for specific instructions on how to open ports. Enter valid ports in the Virtual Server section of your router. Please make sure to check the box next to the camera name on the Virtual Server List to enable your settings. D-Link DCS-910/920 User Manual 57