D-Link DFL-260E CLI Guide for DFL-260E - Page 127
The IP address of the L2TP/PPTP server.
View all D-Link DFL-260E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
3.28.6. L2TPClient Chapter 3. Configuration Reference OriginatorIP OriginatorHAIP DHGroup PFS PFSDHGroup SetupSAPer KeepAlive KeepAliveSourceIP KeepAliveDestinationIP Metric AutoInterfaceNetworkRoute Comments 3.28.6. L2TPClient NAT. (Default: LocalInterface) Manually specified originator IP address to use as source IP in e.g. NAT. Manually specified private originator IP address for use in HA. (Optional) Specifies the Diffie-Hellman group to use when doing key exchanges in IKE. (Default: 2) Specifies whether PFS should be used or not. (Default: None) Specifies which Diffie-Hellman group to use with PFS. (Default: 2) Setup security association per network, host or port. (Default: Net) Disabled, Auto or Manual. (Default: Disabled) Source IP address used when sending keep-alive ICMP pings. Destination IP address used when sending keep-alive ICMP pings. Specifies the metric for the auto-created route. (Default: 90) Automatically add a route for this interface using the given remote network. (Default: Yes) Text describing the current object. (Optional) Description A PPTP/L2TP client interface is a PPP (Point-to-Point Protocol) tunnel over an existing IP network. Its IP address and DNS servers are dynamically assigned. Properties Name IP Network RemoteEndpoint Specifies a symbolic name for the interface. (Identifier) The host name to store the assigned IP address in, if this network object exists and have a value other then 0.0.0.0 the PPTP/L2TP client will try to get that one from the PPTP/L2TP server as preferred IP. (Optional) The network from which traffic should be routed into the tunnel. The IP address of the L2TP/PPTP server. 127